Cart 2 india

Specification
Brand : Radio Design Labs
BulletPoint1 : RDL SILICON X -WATT UTILITY AMPLIFIER, FREQUENCY RESPONSE: 35 HZ~20 KHZ, THD: 0.35 %, INPUT: 10
BulletPoint2 : KILOHM, 400 MV (LINE LEVEL), POWER REQU
ExternallyAssignedProductIdentifier1 : 813721011008
ExternallyAssignedProductIdentifier2 : 0813721011008
Hazmat : auto-grounding
ItemName : Radio Design Labs ST-PA6 6W Mono Audio Amplifier - 8 Ohm
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 3 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemTypeKeyword : audio-component-amplifiers
Manufacturer : Radio Design Labs
Material : Copper, Fiberglass Reinforced Plastic
MaximumSupplyVoltage : 33 volts_of_direct_current
ModelNumber : 4334197839
MountingType : Surface Mount
NationalStockNumber1 : 5845-01-579-9531
NationalStockNumber2 : 5845-01-543-2106
NumberOfChannels : 2
OutputPower : 6 watts
PackageTypeName : Single Unit
PartNumber : ST-PA6
ProductDescription : Inputs (2):10 kΩ balanced (may be wired balanced (may be wiredInput Level:400 mV (RMS) minimum (for rated power output)Frequency Response:35 Hz to 20 kHz (+/- 1.5 dB w/EQ setting flat)Equalization: (Single-turn trimmer)Flat to +5 dB @ 60 Hz (center frequency of boost) Flat to +4 dB @ 100 Hz Flat to +3 dB @ 120 HzTHD+N:< 0.35%Noise:< -60 dBOutput:8 Ω unbalanced, 6 watts RMSPower Requirement:GROUND-REFERENCED, 24 to 33 Vdc @ 400 mAAmbient Operating Environment:-10 C to 50 CThe ST-PA6 represents the second generation of RDLs breakthrough in the traditional power vs. size ratio. Present technology permits features and performance at the most economical cost ever. The ST-PA6 offers 6 watts of power for a price you would expect to pay for 3 watts.The ST-PA6 features two balanced audio inputs, a gain control, equalization control and an 8 Ω output. The output is designed to deliver a clean 6 watts RMS into an 8 Ω speaker. Each input is a balanced bridge, with the two inputs actively mixed equally. This is particularly useful for monitoring a stereo line. The output stage features protection against short-circuits and thermal overload. The output protection automatically resets once the condition is removed, making fuse protection unnecessary.
ProductSiteLaunchDate : 2007-11-20T00:00:00-00:00
SpecificationMet : FCC
UnspscCode : 52161547
Voltage : 24 volts_of_direct_current