Cart 2 india

Specification
Brand : Socobeta
BulletPoint1 : ¡¾OUTPUT SHORT CIRCUIT ¡¿This power amplifier board is professionally designed and has undergone strict quality inspections. It supports output short circuit to ensure the safety of this power amplifier when used.
BulletPoint2 : ¡¾SPEAKER ¡¿This digital power amplifier supports output DC bias and speaker to ensure the safety of the speaker to extent without causing damage to it.
BulletPoint3 : ¡¾OVERHEAT ¡¿This power amplifier module supports heat dissipation . When the temperature of the radiator FET is higher than 100¡ãC, the output will be turned off, making it safer to use.
BulletPoint4 : ¡¾PURE POWER AMPLIFIER BOARD¡¿This is a pure power amplifier board, the sensitivity of its input is 1.5V rms, if your input voltage can not reach this value, it is recommended to add a preamplifier.
BulletPoint5 : ¡¾EASY TO INSTALL AND USE¡¿This digital power amplifier board module is small and light, easy to install and use. The -to-noise ratio of this power amplifier board is 90dB. Mono channel, for 2.0 channel need bid two.
ExternallyAssignedProductIdentifier : 8757736324352
ExternallyAssignedProductIdentifier1 : 4250019131264
ExternallyAssignedProductIdentifier2 : 04250019131264
IncludedComponents : inc
ItemName : Socobeta 500W Power Amplifier Board Mono Channel Digital Amplifier Board HiFi Power Amp Module IRS2092S
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 14 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : audio-component-amplifiers
Manufacturer : Socobeta
Material : Material
MaximumSupplyVoltage : 70 volts_of_direct_current
MinimumSupplyVoltage : 58 volts
ModelNumber : IRS2092S
MountingType : Surface Mount
NumberOfChannels : 1
NumberOfItems : 1
OperatingTemperature : 100 degrees_celsius
OutputPower : 500 watts
PackageTypeName : Small Box or Padded Envelope
PartNumber : Socobetagxwec17kgr
ProductDescription :

This digital amplifier module supports output short circuit protection, output DC bias protection, speaker and overheating When the temperature of the heat sink FET is higher than 100°C, the output will be turned off. This is a pure power amplifier board. The sensitivity of its input signal is 1.5V rms. If your input signal voltage cannot reach this value, it is recommended to add a preamplifier 

Specifications:

Power supply: dual DC power supply ± 58-± 70V

The rated output power: 500W (± 65V power supply, 4 ohm load, distortion 10%)

Efficiency:> = 90%

SNR: 90dB

The total harmonic distortion:

380W (± 65 power 4 ohm speaker, distortion <0.1%)

280W (± 65 power 8 ohm speaker, distortion <0.1%)

Frequency range: 20Hz-20KHz

Speaker: 4-8ohm

Voltage Magnification: 36 times

Input sensitivity 1.5V (RMS)

Output short circuit Yes

That output DC bias speaker Yes

Over-temperature Yes, radiator FET temperature higher than 100 ° C, turn off the output!

Use precautions:

1. Rated supply voltage is ±65V, ±58---±70V range, do not over 70V! positive and negative do not pick wrong

2. Recommended power supply ±65V

3. Recommended 4-8Ω / 10-18inch speaker

4. Carefully check before electricity, ensure the wiring is correct.

Package list:

1 x Digital Amplifier

ProductSiteLaunchDate : 2020-08-20T13:12:09.843Z
SpecificationMet : Industry Standards
SpecificationMet1 : FCC
SpecificationMet2 : RoHS
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43000000
Voltage : 70 volts