Cart 2 india

Specification
Brand : Stick It Anchor Pins
ItemName : Stick It Anchor Pins 2 Piece 10' Black Port Motor Mount and Anchor Pin with Tube Connector
ItemPackageQuantity : 1
ItemTypeKeyword : boating-anchors
Manufacturer : Quad Fab Inc
NumberOfItems : 1
PartNumber : 51203-10_B/P
Pattern : Solid
ProductDescription : Included: 10 ft total length 2 piece Stick It Anchor Pin with Stainless Steel Epoxy Tube Connector (1 x 3 ft anchor pin with a T-handle on one end and stainless steel tube connector on the other end and 1 x 7 ft anchor pin with a grounded point on one end - to be joined together with epoxy to become a permanent one piece anchor pin) 1 x 0.47 oz 2 part Epoxy 2 x Mounting clips, screws and velcro safety straps Aluminum motor mount bracket Impact cushion and Rubber Grommet This system is used when a customer requires a 10 foot, one-piece Stick It Anchor Pin that may not be available at a local dealer. Our solution is a 10 ft x ¾ inch reinforced polyester resin Stick It Anchor Pin connected with a Stainless Steel epoxy-together tube to form a permanent one piece anchor pin. We provide you with one end of the Stick It Anchor Pin with the stainless steel tube attached. When you receive your order you will attach the other 7 foot end of the Stick It Anchor Pin with the epoxy we provide you. Allow it to set overnight and you have a durable, long Stick It Anchor Pin without having to pay exorbitant shipping prices. The Stick It Anchor Pins Motor Mount Bracket is a ⅜” thick aluminum mounting bracket that attaches where your motor meets the transom. It mounts directly on top of your outboard motor’s mounting bracket. It’s recommended for flats boats/bass boats up to 20ft and bay boats up to 19 ft and with 200 hp engines or less. Motor Mount will fit engine bolt spacing of 7-1/4 to 8-1/2 inches apart. Be sure to check for clearance of trim tabs, trailer tie downs, eye cleats, poling platforms, or any other object mounted near your transom wall. It can be used with some jack plates, but when moving the jack plate, clearance can be an issue. Installation is easy.
ProductSiteLaunchDate : 2024-03-18T16:42:20.884Z
UnspscCode : 49000000
WarrantyDescription : 1 year manufacturers warranty