Cart 2 india

Specification
Brand : ACTOOL
BulletPoint1 : ACTOOL Pilot Pin 6.35x77mm
BulletPoint2 : Fit for 1'' Cutting Depth HSS Annular Cutter with 3/4'' weldon shank
BulletPoint3 : Locate the center during drilling
BulletPoint4 : Eject slug after drilling finish
BulletPoint5 : Initiate coolant flow into the inside of the cutter
BulletPoint6 : Sturdy plastic case holding one annular cutter, one pilot pin
Color : Gray
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 5055558500033
ExternallyAssignedProductIdentifier1 : 779283559955
ExternallyAssignedProductIdentifier2 : 0779283559955
ExternallyAssignedProductIdentifier3 : 00846035000062
FinishType : Uncoated
GpsrSafetyAttestation : 1
Hazmat : auto-grounding
IncludedComponents : One cutter and pin
ItemDisplayDimensions_Height : 5 inches
ItemDisplayDimensions_Length : 10 inches
ItemDisplayDimensions_Width : 10 inches
ItemName : ACTOOL Pilot Pin 6.35x77mm for 1'' Cutting Depth HSS Annular Cutter with 3/4'' Weldon Shank
ItemPackageDimensions_Height : 8.9154 centimeters
ItemPackageDimensions_Length : 2.413 centimeters
ItemPackageDimensions_Width : 2.413 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : annular-cutters
Manufacturer : ACTOOL
Material : Alloy Steel
Material1 : High Speed Steel
Material2 : Alloy Steel
ModelName : Rotabroach RAP140 Raptor 14mm M2 Standard Cutter
ModelNumber : ANNULAR CUTTER 1*2
NumberOfFlutes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : ACP001
PowerSourceType : hand_powered
ProductDescription :

Specs

• Cutting Diameter: 1''
• Cutting Depth: 2''
• Shank Diameter: 3/4''
• Shank Style:Weldon Flat
• Number of Flats: 2
• Material:High Speed Steel（HSS）
• Finish/Coating:Bright
• Fits:Hole processing field such as engineering, rail transit, bridges, ships,machinery manufacturing, aerospace. Mild & Structural Steel; Aluminum;Stainless Steel (lower BHN)

Application

The cutter is used for drilling through steel. They produce accurate burr-free holes to close tolerances without pre-drilling or step drilling. They can drill a much larger hole and requires less force and time than a standard twist drill bit.

The annular Cutter offers superior holemaking capabilities. It cut faster, last longer, produces a better hole finish, a true round hole with very tight tolerances, can be re-sharpened and drills holes with less power and torque.

Requirement to cutting rotate speed of annular cutter are also different for different diameters,and reasonable cutting rotate speed will prolong service life of annular cutter directly,So we recommend:1.The cutting speed:VC=20-25m/min 2.The reasonable rotate feed amount shall be fn=0.08-0.13mm/r 3.The reasonable feed rate shall be vf=36-60mm/min 

Notes

What Causes Dull or Broken Cutters?

The primary cause of broken or prematurely dull cutters is a feed rate that is too slow. Slow feed rates will reduce the life of your cutter. Using a firm, steady feed pressure throughout the cut will maximize performance and extend tool life.

Second reason why cutters break is movement of the drill or work piece. The cutter wall can easily be snapped if the drill and material is not held rigid.

ProductSiteLaunchDate : 2020-10-31T08:04:47.659Z
Size : 5/8 inches x 2 inches
Style : 25mm Depth of Cut
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Aluminum,Stainless Steel,Wood,Cast Iron,Steel,Brass
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Metal
SurfaceRecommendation3 : Wood
ToleranceHeld : Precision
UnitCount : 1
UnspscCode : 27111700