Cart 2 india

Specification
Brand : JESTUOUS
BulletPoint : Circuit Board Drill Bits
BulletPoint1 : 『Carbide Tips』Tungsten carbide tipped weldon shank annular cutter, 6 carbide tips with silver soldering,the other part are alloy steel,sharper than HSS annular cutters.
BulletPoint2 : 『Better Performance』Selected special-purpose carbide tips with multi-cut geometry for ply-cutting and lower friction,reduced damage of tips and improved performance of chips removal.
BulletPoint3 : 『You Will Get』Includes 1 cutter ( Cutting Diameter:1-1/16"), 1 pilot pin(7.98x106mm) & 1 transparent plastic case.
BulletPoint4 : 『Weldon Shank』Applicable to hole cutting and process of annular groove on various magnetic drills and press,can also be used with machine tools such as mills and large drill presses with tool holders.
BulletPoint5 : 『Widely Usage』Applicable materials include various steel material, steel plate, stainless steel, aluminum, brass, cast iron, etc.
Color : Multicolor
CuttingAngleString : 120.0 degrees
ExternallyAssignedProductIdentifier : 9408675768231
ExternallyAssignedProductIdentifier1 : 792966783546
ExternallyAssignedProductIdentifier2 : 0792966783546
FinishType : Silver
GpsrSafetyAttestation : 1
ItemName : Annular Cutter Carbide JESTUOUS 3/4 Inch Weldon Shank 2 Cutting Depth 1-1/16 Cutting Diameter TCT Two Flat Bit for Drill Press with Pilot Pin
ItemPackageDimensions_Height : 14.3002 centimeters
ItemPackageDimensions_Length : 4.2926 centimeters
ItemPackageDimensions_Width : 8.2042 centimeters
ItemPackageQuantity : 6
ItemShape : Round
ItemTypeKeyword : annular-cutters
Manufacturer : Tungsten technology inc
Material : Carbide
ModelNumber : JES-CUTTER-11162
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : JES-CUTTER-11162
ProductDescription :

Specifications

• Item:carbide TCT standard weldon annular cutter set(slugger cutter/slugger bits)
• Includes: 1 annular cutter; 1 pilot pin & 1 carrying case
• Cutting diameter:1-1/16"
• Cutting depth: 2"
• Shank diameter: 3/4"
• Shank Style: weldon flat
• Number of Flats: 2
• Accessories: 1 pilot pins(7.98x106mm)
• Material:carbide tips+alloy steel
• Type:core drill bit,weldon shank
• Finish:white sand
• Treatment:all-ground
• Use:metal Drilling
• Packing:plastic box

Features

1. TOOTH:layered cutting geometry design,ring cutting,reduce power consumption,high efficiency and energysaving.
2. GROOVE:large capacity chute,unique spiral groove design,chipping is smooth,easy and quick.
3. SHANK TYPE:weldon shank,with more stable clamping for stable cutting and finish of holes,shank diameter 3/4 inch(19.05mm),suitable for 120 degree,three points bolt,fastening for fast loading and unloading chuck bit clamp interface.
4. PILOT PIN:the pilot pin is used for the top needle function of position,cooling value and discharge core.

Application

1.The cutting speed:VC=20-25m/min

2.The reasonable rotate feed amount shall be fn=0.08-0.13mm/r.The reasonable feed rate shall be vf=36-60mm/min. "Weldon shank" annular cutters have 2 flats and fix in the chuck by tightening grub screws in the two flat areas.

3.Insert the ejector pin inside the annular cutter

4..Fill the coolant tank with oil lubrication.

Warm tips

Protect your eyes,and fingers and belongings away from the drilling cutter.

ProductSiteLaunchDate : 2021-05-13T08:37:31.579Z
Size : 7.5mm 2pc
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
UnitCount : 1
UnspscCode : 27112700