Cart 2 india

Specification
Brand : Drill America
BulletPoint1 : nACo Nano-Composite Blue coating increases tool life up to 30% compared to traditional HSS annular cutters offering extra protection against tool wear and high heat
BulletPoint2 : Cuts difficult materials, including steel, cast iron, heated and stainless steels
BulletPoint3 : Cuts only necessary material for fast, efficient, quality hole making
BulletPoint4 : 3/4" Weldon Shank fits most magnetic drill presses. For use with magnetic drill press only. Do not use with a standard hand drill or drill press.
BulletPoint5 : Instructions for use: Make sure the flat surface of the handle is aligned with the screw when installing to achieve stable cutting. Second, use the recommended cutting fluid (over 1000 cuts) instead of water (only for 3-5 cuts). Choosing the right cutting fluid is essential to extend tool life. Third, the correct rotation speed and feed rate can help you double your efficiency
ExternallyAssignedProductIdentifier : 05060917981200
ExternallyAssignedProductIdentifier1 : 887861307215
ExternallyAssignedProductIdentifier2 : 0887861307215
FinishType : nACo Blue Coated
GpsrSafetyAttestation : 1
HandOrientation : Right Hand
IncludedComponents : Annular Cutter with pilot pin
ItemName : Drill America 1-1/2" X 2" NACO Blue (Nano-Composite) Coated Annular Cutter, ANC Series
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : annular-cutters
Manufacturer : Drill America
Material : High Speed Steel
Material1 : Cobalt Steel
Material2 : Tungsten Steel
MfgSeriesNumber : ANC
ModelNumber : ANC5-530-257
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : ANC5-530-257
ProductDescription : "Superior Performance Under Pressure: Harder, Sharper, Stronger Material composition: Mainly composed of tungsten carbide and cobalt (Co), with cobalt as a binder. Features: High hardness (92-93 HRC). Excellent wear resistance and heat resistance. Good toughness, suitable for bearing certain impacts. Applicable scenarios: Used for cutting medium-hard materials, such as stainless steel, low-carbon steel, aluminum alloy, etc. Suitable for scenarios that require both cutting efficiency and durability, such as continuous batch processing Universal Shank： A highly adaptable shank design. Usually compatible with Weldon and other standard shank forms. Applicable to a variety of magnetic drills to reduce compatibility issues between devices"
ProductSiteLaunchDate : 2020-12-11T16:39:56.707Z
Size : 1-1/2"
Style : 2" Depth of Cut
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Metal
UnitCount : 1
UnspscCode : 27110000