Cart 2 india

Specification
Brand : Hougen
BulletPoint1 : Hougen has been making “12, 000-series” annular cutters since we invented them in 1974. At one time, our president was putting the tooth geometry on every hougen cutter in the world.
BulletPoint2 : 3/4" two flats for cutter mounting, o. D. Margins, i. D. Margins, fully fluted tools, patented tooth geometries, material types, coatings, and resharpenability.
BulletPoint3 : Hougen cutters with the hougen-edge, feature a patented tooth geometry that provides long tool life, less chatter, and extended resharpenability.
BulletPoint4 : Compared to traditional tooling (twist drills, etc. ) hougen cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs.
BulletPoint5 : Hougen cutters maximize feed rates because up to 10 or more cutting edges distribute the cutting load evenly. By converting a smaller area to chips, hougen cutters require less horsepower and thrust. American made.
Color : Gray
ExternallyAssignedProductIdentifier1 : 662850002483
ExternallyAssignedProductIdentifier2 : 0662850002483
FinishType : Sand Blast
GpsrSafetyAttestation : 1
HandOrientation : Both Hands
IncludedComponents : One cutter and pin
ItemName : Hougen 12152 1-5/8" X 1" Rotabroach "12, 000-Series" M2 High Speed Steel Magnetic Drill Annular Cutter (for Use with Pilot 10527)
ItemPackageDimensions_Height : 11.6 centimeters
ItemPackageDimensions_Length : 6.7 centimeters
ItemPackageDimensions_Width : 7.1 centimeters
ItemPackageQuantity : 1
ItemShape : Circular
ItemTypeKeyword : annular-cutters
Manufacturer : Hougen Mfg.
Material : High Speed Steel
ModelNumber : 12152
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 12152
PowerSourceType : Hand Powered
ProductDescription : For use with hougen portable magnetic drills andpetitive models on materials up to 275 bhn (28. 5 hrc). They are made of hardened m2 high speed steel and are precision ground for excellent performance throughout the cut and long tool life. They require less horsepower and thrust to cut, and last much longer than traditional holemaking methods. "12, 000-series" cutters have a 3/4" diameter double-flatted shank. Modified end tooth geometry is also available for drilling in stacked plate applications. For extended tool life and lower cost per hole "12, 000-series" cutters are resharpenable.
ProductSiteLaunchDate : 2017-01-30T09:18:55.082Z
Size : 1 inches x 2 inches
Style : Diamond Hole Saw
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
SurfaceRecommendation1 : Aluminum
SurfaceRecommendation10 : Cast Iron
SurfaceRecommendation11 : Iron
SurfaceRecommendation12 : Brass
SurfaceRecommendation13 : Ceramic
SurfaceRecommendation14 : Engineered Wood
SurfaceRecommendation15 : Polyvinyl Chloride
SurfaceRecommendation16 : Acrylonitrile Butadiene Styrene
SurfaceRecommendation17 : Nylon
SurfaceRecommendation18 : Porcelain
SurfaceRecommendation19 : Glass
SurfaceRecommendation2 : Metal
SurfaceRecommendation20 : Pine
SurfaceRecommendation3 : Plastic
SurfaceRecommendation4 : Stainless Steel
SurfaceRecommendation5 : Wood
SurfaceRecommendation6 : Copper
SurfaceRecommendation7 : Alloy Steel
SurfaceRecommendation8 : Concrete
SurfaceRecommendation9 : Stone
UnitCount : 1
UnspscCode : 27112700
WarrantyDescription : 1 year