Cart 2 india

Specification
Brand : Hougen
BulletPoint1 : For use with Hougen Portable Magnetic Drills and many competitive models on materials up to 275 BHN (28.5 HRC). They are made of hardened M2 high speed steel and are precision ground for excellent performance throughout the cut and long tool life. They require less horsepower and thrust to cut, and last much longer than traditional holemaking methods. "12,000-Series" cutters have a 3/4" diameter double-flatted shank. Modified end tooth geometry is also available for drilling in stacked plate applications. For extended tool life and lower cost per hole "12,000-Series" Cutters are resharpenable.
BulletPoint2 : Hardened M2 high speed steel material Precision ground & fully fluted provides better chip evacuation, requires less horsepower & offers better performance in deeper holes
BulletPoint3 : 3/4" double flatted shank is very rigid & offers up to 2 times the tool life as compared to quick change tool mounting on competitive products Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish
BulletPoint4 : Patented hougen-edge geometry provides faster, smoother cuts, with less chatter Tapered inner diameter provides a relief area between the material & cutter to reduce horsepower & improve ejection
BulletPoint5 : Up to 10 cutting edges distribute the cutting load evenly to maximize feed rates and offers a higher scrap value than loose chips
CareInstructions : Hand Wash Only
ExternallyAssignedProductIdentifier1 : 0662850025413
ExternallyAssignedProductIdentifier2 : 662850025413
GpsrSafetyAttestation : 1
IncludedComponents : Bag
ItemName : Hougen 18983-2 Copperhead Carbide Cutter Kit - 11/16, 13/16, 15/16" 2" DOC
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : annular-cutters
Manufacturer : Hougen
Material : Carbide
Material1 : Stainless Steel
Material2 : Carbide
ModelName : R8 ER40 M12
ModelNumber : 12985-1
NumberOfItems : 1
PartNumber : 18983-2
PowerSourceType : Hand Powered
ProductDescription : HOUGEN COPPERHEAD CARBIDE CUTTER KIT - (18983-2)
ProductSiteLaunchDate : 2018-10-04T12:00:00.000-08:00
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Plastic
UnitCount : 1
UnspscCode : 20121600