Cart 2 india

Specification
Brand : Milwaukee
BulletPoint1 : Manufacturer: Milwaukee
BulletPoint2 : Country of manufacture: Germany
BulletPoint3 : Power Cutting & Sawing
BulletPoint4 : 20% Thinner Wall Construction - Faster Cutting due to less material being removed for the same size hole. Duel Alternating Tooth Geometry - More aggressive cutting as well as increased chip ejection. Cuts up to 15% faster.
BulletPoint5 : Proprietary Steel and 3 Hardness Zones - Makes the bit less susceptible to breakage. 3/4" Weldon Shank - Fits most small magnetic drill presses. One Centering pin size for all 2" depth cutters. Ejector pin sold separately.
BulletPoint6 : Diameter 11/16"
BulletPoint7 : Cutting Depth 2 in
BulletPoint8 : Diameter Shank 3/4 in
Color : Gray
ExternallyAssignedProductIdentifier : 4014586606996
ExternallyAssignedProductIdentifier1 : 045242207787
ExternallyAssignedProductIdentifier2 : 0045242207787
ExternallyAssignedProductIdentifier3 : 00045242207787
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : Unit^Instruction Guide
ItemDisplayDimensions_Height : 4 inches
ItemDisplayDimensions_Length : 2 inches
ItemDisplayDimensions_Width : 2 inches
ItemName : Hss Annular Cutter, 11/16 In, 2 In Cut D
ItemPackageDimensions_Height : 4.826 centimeters
ItemPackageDimensions_Length : 9.144 centimeters
ItemPackageDimensions_Width : 5.08 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : annular-cutters
Manufacturer : Milwaukee
Material : Steel plate
ModelNumber : 49-59-2069
NumberOfFlutes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 49-59-2069
ProductDescription : Steel Dragon Tools 1-1/8" x 1" High Speed Steel Annular Cutter with 3/4" Weldon Shank

1 1/8" x 1" depth of cut high-speed steel annular cutter

Diameter of cut: 1 1/8''

Cutting Depth: 1''

3/4" Weldon Shank

Cuts holes in steel accurately, quickly & safely

Large holes can be drilled up to ten times faster than regular drill bits

Make overlapping holes, slotting holes and edge cuts

Made from tough, high-speed tool steel

Machine-finish hole-no reaming needed when used with Lubricant

Each specific size laser etched on shank


ProductSiteLaunchDate : 2007-02-17T03:25:04-00:00
Size : 1-1/4 inches x 1 inches
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
UnitCount : 1
UnspscCode : 20121600