Cart 2 india

Specification
Brand : MaxTool
BulletPoint1 : Premium Carbide Tips ensure a longer tool life. The unique geometry provides aggressive cutting than traditional hole saws and twist drill bits. Large holes can be drilled up to ten times faster than regular drills;
BulletPoint2 : 3/4-Inch Weldon shank with 2 flats at 90-Degree makes cutters mounting reliable, and extend tool life than other mounting system. It fits most brand magnetic drill presses;
BulletPoint3 : Multiple cut edges provide more efficient cut rate with less chatter and suit to making overlapping holes, slotting holes and edge cuts in various metals accurately, quickly & safely;
BulletPoint4 : I.D. back taper improves easily discharge metal slugs, faster feeding, and less friction; O.D. margin ensures only a small lend touches the outside of the hole which provide less fraction and a better hole surface finish;
BulletPoint5 : Precision fully ground flutes provide easier chip removal, less H.P. needs, better cutting performance and a smooth hole finish in various materials, especially in deeper holes; Using coolant or Lubricant for better cutting result;
Color : 2" Cut Depth
CuttingAngleString : 90.0 degrees
ExternallyAssignedProductIdentifier1 : 634301953743
ExternallyAssignedProductIdentifier2 : 0634301953743
FinishType : Uncoated
GpsrSafetyAttestation : 1
HandOrientation : Right Hand
IncludedComponents : Center pin
ItemLength : 4 inches
ItemName : MAXTOOL 1-1/16"x1-3/8 TCT Annular Cutters & Pin Carbide Tip Slugger 27x35mm Magnetic Core Drills Slug Cutter 1-3/8" Deep Weldon Shank; ANW00S35R104
ItemPackageDimensions_Height : 10.3124 centimeters
ItemPackageDimensions_Length : 4.0894 centimeters
ItemPackageDimensions_Width : 4.0894 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : annular-cutters
Manufacturer : M&G
Material : Carbide
MeasurementSystem : Imperial
MfgSeriesNumber : 6-Series
ModelName : GROO-V TIP BIT
ModelNumber : ANW00S35R104
NumberOfFlutes : 6
NumberOfItems : 2
NumberOfPieces : 25
PackageLevel : unit
PartNumber : ANW00S35R104
ProductDescription : Annular Cutters, Magnetic Railway Core Drills or Broach Cutters are for precision hole making in a wide range material;MaxTool Magnetic Core drills/Annular Cutters make clean, burr-free, round holes with no deform of stock or damage to the surrounding material;

Ideal for metal sheets and rust proofing access holes because the snap-in plugs fit perfectly;

Premium carbide tips provide sharp, hard and a long tool life. The unique geometry provides aggressive cutting than traditional tools. Large holes can be drilled up to ten times faster than regular drills;

Weldon shank with 2 flats at 90-Degree makes cutters mounting reliable, and extend tool life than other mounting system. It fits most brand magnetic drill presses;

Multiple cut edges provide more efficient cut rate with less chatter and suit to making overlapping holes, slotting holes and edge cuts in various metals accurately, quickly & safely;

I.D. back taper improves easily discharge slugs, faster feeding, and less friction; O.D. margin ensures only a small land touches the outside of the hole which provide less fraction and a better hole surface finish;

Precision fully ground flutes provide easier chip removal, less H.P., better cutting performance and a smooth hole finish, especially in deeper holes; Using coolant or Lubricant for better cutting result;

MaxTool is a cutting tools distributor in New York to meet a wide range cutting demand in today's markets;

MaxTool supplies standard and custom-made high performance cutting tools for machining ferrous, non-ferrous, etc;

All items are carefully inspected before listing;

MaxTool warmly welcomes and honestly appreciates everyone to give a chance to discuss your demand;

MaxTool will do the best to make every one satisfaction. You can always rely on MaxTool;

MaxTool’s slogan is Consistent Quality;

MaxTool! ToolMax!
ProductSiteLaunchDate : 2021-04-07T03:39:23.870Z
Size : 2-3/4" x 1"
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
UnitCount : 1
UnspscCode : 27112700