Cart 2 india

Specification
Brand : Garosa
BulletPoint1 : If you are not satisfied with our products or services for any reason, please feel to us and give us the opportunity to solve the problem. We will bring customers a good shopping experience as our goal.
BulletPoint2 : Application - Morse taper shank come with stable structure, excellent performance,the Extension Drill Chuck is suitable for magnetic drills, radial drills, bench drills, lathes, vertical drills and drilling equipment, etc.
BulletPoint3 : The reasonable linear speed of the cutting should be more than 40 meters per minute when drilling hard alloy steel plates, and the minimum should not be as low as 30 meters. At the same time, cemented carbide is a highhardness material. The blade should be prevented from bumping during storage and retrieving, and impact should be prevented during use.
BulletPoint4 : Material - This Hollow Boring Bit is made of good-quality steel material, with high strength, plasticity, heat and toughness.
BulletPoint5 : This drill-use annular cutter is made of steel, , high strength, good plasticity, good heat resistance, and good toughness. It is suitable for magnetic drills, radial drills, bench drills, lathes, vertical drills and drilling equipment, etc.
Color : 49x35mm
ExternallyAssignedProductIdentifier1 : 0758439380148
ExternallyAssignedProductIdentifier2 : 758439380148
FinishType : Chrome
IncludedComponents : 1 Set* Annular Cutter
ItemName : Morse Taper Shank, Annular Cutter Arbor Hollow Boring Bit Morse Taper Shank Conversion Extension Fixture, Knives and Accessories for, Drillbits
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : annular-cutters
Manufacturer : Garosa
Material : High Speed Steel
ModelName : Garosaauxgv9wk32
ModelNumber : Garosaauxgv9wk32
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : Garosaauxgv9wk32
ProductDescription :
Spec:
Item Type: Annular Cutter Arbor
Model: MT3
Color: Silver
Material: Steel
Inner Diameter: Approx. 19.05mm / 0.8in
Total Length: Approx. 175mm / 6.9in
External Cooling Fixture: External cooling is required when drilling (external cooling nozzle or pot can be used for watering, equipment without a kettle is preferred)
Application: Magnetic drill, radial drill, bench drill, lathe, vertical drill drilling equipment, etc.

packing list:
1 x Annular Cutter Arbor
1 x Wrench

Notice:
1. Before starting to drill, make sure that the tool has been completely installed in place, and there is no looseness or unclamping situation.
2. When using a magnetic drill to drill, it must be ensured that there is no iron filings under the magnetic block of the drill, the adsorption is flat, and the machine has no swing or incomplete adsorption.
3. The whole process from the beginning of the drilling to the completion of the drilling should be kept cool enough without interruption. Brief cooling can easily cause tool chipping.
4. At the beginning of drilling, the tool should be fed slowly and smoothly, and the feed speed can be increased after cutting into 1~2MM. When exiting the tool, slow down the feed speed appropriately, and keep the feed evenly during the middle cutting process.
5. The reasonable linear speed of the cutting should be more than 40 meters per minute when drilling hard alloy steel plates, and the minimum should not be as low as 30 meters. At the same time, cemented carbide is a high‑hardness material. The blade should be prevented from bumping during storage and retrieving, and impact should be prevented during use.


ProductSiteLaunchDate : 2024-01-20T17:02:34.292Z
Size : 5Pcs - 2''
Style : Annular Cutter & Annular Cutter Arbor, Morse Taper MT3
SupplierDeclaredDgHzRegulation : unknown
SurfaceRecommendation : Metal
UnitCount : 1
UnspscCode : 27112700