Cart 2 india

Specification
Brand : AD INTERNATIONAL
BulletPoint : Circuit Board Drill Bits
BulletPoint1 : Annular cutter 1/2" shank tool steel holder (Rota broaches) with lock screw- Accepts/ suit 19 mm shank rota broaches
BulletPoint2 : Made of alloy steel-hardened and ground in close tolerances.
BulletPoint3 : This holder can be used in a drill press, lathes, mills or magnetic drilling machines.
BulletPoint4 : Holder dimensions: Shank 12.5 mm (*through bore 7 mm) , OAL: 62 mm, Holder body diameter: 36 mm,
BulletPoint5 : ID to hold cutter's shank 19.05 mm, Depth for holding cutter's hank : 25 mm, 2 x grub screw @ 90 degree for clamping of cutter's shank
BulletPoint6 : 【Instructions for use】Simply fit the round hole at the end of the shank to the steel ball in the drill chuck, then tighten the hexagonal bolt on the flat surface at the end of the shank to secure the shank with the hexagonal bolt.
Color : Silver
CuttingAngleString : 118 degrees
ExternallyAssignedProductIdentifier : 9408675183812
ExternallyAssignedProductIdentifier1 : 9631108548890
ExternallyAssignedProductIdentifier2 : 09631108548890
FinishType : Sand Blast
GpsrSafetyAttestation : 1
IncludedComponents : 1x annular cutter;1x pilot pin
ItemName : New Annular Cutter 1/2" Shank Tool Steel Holder (Hard & Ground) with Lock Screw- Accepts/Suit 19 mm Shank rota broaches
ItemPackageDimensions_Height : 8.7122 centimeters
ItemPackageDimensions_Length : 7.3914 centimeters
ItemPackageDimensions_Width : 8.7122 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : annular-cutters
Manufacturer : ADI
Material : Tool Steel
Material1 : High Speed Steel
Material2 : Carbide
Material3 : Blend
Material4 : Blend
Material5 : Blend
MeasurementAccuracy : no
MeasurementSystem : Imperial
ModelNumber : 8202570
NumberOfFlutes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 8202570
Pattern : .22 LR
ProductDescription : Made of alloy steel-hardened and ground in close tolerances. Annular cutter 1/2" shank tool steel holder (Rota broaches) with lock screw- Accepts/ suit 19 mm shank rota broaches This holder can be used in a drill press, lathes, mills or magnetic drilling machines. Holder dimensions: Shank 12.5 mm (*through bore 7 mm) , OAL: 62 mm, Holder body diameter: 36 mm, ID to hold cutter's shank 19.05 mm, Depth for holding cutter's hank : 25 mm, 2 x grub screw @ 90 degree for clamping of cutter's shank
ProductSiteLaunchDate : 2018-05-02T14:00:00.000Z
Size : One Size
Style : For Holding Cutter
SupplierDeclaredDgHzRegulation : other
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Structural
SurfaceRecommendation1 : Metal
SurfaceRecommendation2 : Aluminum
SurfaceRecommendation3 : Copper
UnitCount : 1
UnspscCode : 44111800