Cart 2 india

Specification
Brand : Steel Dragon Tools
BulletPoint1 : The Steel Dragon Tools HSS annular cut 7-piece kit includes six (6) annular bits and one (1) pilot pin.
BulletPoint2 : Bit sizes included: 9/16 in. 11/16 in. 13/16 in. 15/16 in. 1 in. and 1-1/16 in.
BulletPoint3 : Bits have 2-inch cutting depth with a 3/4 in. Weldon shank.
BulletPoint4 : Includes carrying case.
BulletPoint5 : Steel Dragon Tools annular cutters will drill large holes up to ten times faster than regular drills bits.
ExternallyAssignedProductIdentifier1 : 817482026622
ExternallyAssignedProductIdentifier2 : 0817482026622
GpsrSafetyAttestation : 1
ItemName : Steel Dragon Tools 7 HSS Annular Cutter Kit 9/16in. - 1-1/16in. with 2in. Depth and 3/4in. Weldon Shank
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemTypeKeyword : annular-cutters
Manufacturer : Steel Dragon Tools
Material : Alloy Steel
ModelNumber : 38519030
NumberOfItems : 1
PackageLevel : unit
PartNumber : SDT-MD-2CS
ProductDescription : Steel Dragon Tools 7 HSS Annular Cutter Kit 9/16in. - 1-1/16in. with 2in. Depth and 3/4in. Weldon Shank

The Steel Dragon Tools high-speed steel annular cutter 7-piece kit includes six (6) annular bits and one (1) pilot pin. These bits will quickly and safely cut holes in steel. The bits have a 2-inch cutting depth with a 3/4 in. Weldon shank. Bit sizes included: 9/16 in., 11/16 in., 13/16 in., 15/16 in., 1 in., and 1-1/16 in.

Features:

Steel Dragon Tools annular cutters will drill large holes up to ten times faster than regular drills bits.

Machine-finish hole with no reaming needed when using lubricant.

Make overlapping holes, slotting holes, and edge cuts.

Bit size is etched on each cutter.

Pilot pin helps locate the center of hole location.

Pilot pin helps eject slug after drilling is complete.

During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.

Specifications:

Kit includes six (6) high-speed steel annular cutters and one (1) pilot pin.

Bit sizes included: 9/16 in (.255 in. inner diameter) 11/16 in. (.385 in. inner diameter) 13/16 in. (.486 in. inner diameter), 15/16 in. (.608 in. inner diameter), 1 in. (.672 in. inner diameter)and 1-1/16 in. (.742 in. inner diameter).

Cutting Depth: 2 in.

3/4 in. Weldon Shank

Pilot Pin: 1/4 in. x 4 in. (6.34 mm x 103 mm)

Includes carrying case.


ProductSiteLaunchDate : 2012-09-27T20:08:22.580Z
Size : 19mm
StreetDate : 2014-10-02T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
UnitCount : 1
UnspscCode : 27110000