Cart 2 india

Specification
Brand : Steel Dragon Tools
BulletPoint1 : Steel Dragon Tools 1-1/8-inch carbide-tipped annular cutter.
BulletPoint2 : Bit Size: 1-1/8 in.
BulletPoint3 : Cutting Depth: 2 in.
BulletPoint4 : 3/4 in. Weldon Shank
BulletPoint5 : Machine-finish hole with no reaming needed when using lubricant.
ExternallyAssignedProductIdentifier1 : 819891026637
ExternallyAssignedProductIdentifier2 : 0819891026637
ItemDisplayDimensions_Height : 1 inches
ItemDisplayDimensions_Length : 9 inches
ItemDisplayDimensions_Width : 7 inches
ItemName : Steel Dragon Tools DNTX-D1125 1-1/8" x 2" Carbide Tip Annular Cutter 3/4" Weldon
ItemPackageDimensions_Height : 23.9 centimeters
ItemPackageDimensions_Length : 4.3 centimeters
ItemPackageDimensions_Width : 17.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : annular-cutters
Manufacturer : Steel Dragon Tools
Material : Carbide
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : DNTX-D1125
ProductDescription : Steel Dragon Tools DNTX-D1125 1-1/8" x 2" Carbide Tip Annular Cutter 3/4" Weldon

The Steel Dragon Tools 1-1/8-inch carbide-tipped annular cutter. This bit will quickly and safely cut holes in steel. This bit has a 2-inch cutting depth with a 3/4 in. Weldon shank.

Features:

SDT annular cutters will drill large holes up to ten times faster than regular drills bits.

Bit Size: 1-1/8 in.

Cutting Depth: 2 in.

3/4 in. Weldon Shank

Machine-finish hole with no reaming needed when using lubricant.

Make overlapping holes, slotting holes, and edge cuts.

Bit size is etched on each cutter.


ProductSiteLaunchDate : 2018-11-15T14:38:14.959Z
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
UnitCount : 1
UnspscCode : 27110000