Cart 2 india

Specification
Brand : Unibor
BulletPoint1 : UNIQUE CUTTER GEOMETRY: Designed with unique Unibor cutter geometry optimized for cutting speed, these M2 annular cutters provide market-leading cutting power at a budget-friendly price point. They offer efficient and precise cutting performance for various drilling tasks.
BulletPoint2 : HIGH-QUALITY STEEL CONSTRUCTION: Produced from high-quality steel, these M2 annular cutters are designed to deliver exceptional performance and durability. They are well-suited for general cutting of mild steel and softer materials, offering a balance of performance and value.
BulletPoint3 : IDEAL CHOICE DRILL BIT: The Unibor Annular Cutter M2 Mag Drill Bit is an ideal choice for drilling mild steel, brass, aluminum, and plastic materials. It provides reliable and efficient performance for a variety of drilling applications.
BulletPoint4 : DIFFERENT SIZES AND DEPTHS: Available in 30mm and 50mm depths of cut, with a diameter range of 10mm to 60mm, these M2 cutters are suitable for a wide range of different jobs. Their versatility and performance make them a valuable asset for any project, providing reliable cutting solutions.
BulletPoint5 : Unibor has been an industry-leading brand for over 40 years, delivering incomparable levels of efficiency and effectiveness with the highest standards of magnetic drills. From Commando 35 to E100, Unibor has a power tool for you. With a pillar drill capable of various functions, including countersinking, core drilling, twist drilling, tapping, and more, Unibor machines are up for any challenge.
Color : 9/16"
CuttingAngleString : 90.0 degrees
ExternallyAssignedProductIdentifier : 5055558566190
ExternallyAssignedProductIdentifier1 : 4006885347403
ExternallyAssignedProductIdentifier2 : 04006885347403
FinishType : Brass
GpsrSafetyAttestation : 1
IncludedComponents : Cutter
ItemName : Unibor Annular Cutter M2 Mag Drill Bit - Ideal for Mild Steel, Brass, Aluminium and Plastic | Size 9/16" X 1", M2 HSS, 3/4 Shank, Pin Included
ItemPackageDimensions_Height : 10.7 centimeters
ItemPackageDimensions_Length : 2.9 centimeters
ItemPackageDimensions_Width : 3 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : annular-cutters
Manufacturer : Unibor
Material : High Speed Steel
ModelNumber : 24118
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 24118
ProductDescription :

Specs

Cutting Diameter:1/2''

Cutting Depth:2'' 

Shank Diameter:3/4''

Pilot pin size:6.34*103mm

Shank Style:Weldon Flat

Number of Flats:2

Material:High Speed Steel（HSS）

Finish/Coating:Bright

Fits:Hole processing field such as engineering, rail transit, bridges, ships,machinery manufacturing, aerospace. Mild & Structural Steel; Aluminum;Stainless Steel (lower BHN)

Application

The cutter is used for drilling through steel. They produce accurate burr-free holes to close tolerances without pre-drilling or step drilling. They can drill a much larger hole and requires less force and time than a standard twist drill bit.

The annular Cutter offers superior holemaking capabilities. It cut faster, last longer, produces a better hole finish, a true round hole with very tight tolerances, can be re-sharpened and drills holes with less power and torque.

Requirement to cutting rotate speed of annular cutter are also different for different diameters,and reasonable cutting rotate speed will prolong service life of annular cutter directly,So we recommend:1.The cutting speed:VC=20-25m/min 2.The reasonable rotate feed amount shall be fn=0.08-0.13mm/r 3.The reasonable feed rate shall be vf=36-60mm/min 

Notes

What Causes Dull or Broken Cutters?

The primary cause of broken or prematurely dull cutters is a feed rate that is too slow. Slow feed rates will reduce the life of your cutter. Using a firm, steady feed pressure throughout the cut will maximize performance and extend tool life.

ProductSiteLaunchDate : 2012-01-12T00:00:01-00:00
Size : 9/16-Inch
Style : ø53mm
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Aluminum,Steel,Brass
SurfaceRecommendation1 : Stone
SurfaceRecommendation2 : Brick
UnitCount : 1
UnspscCode : 20121600