Cart 2 india

Specification
Brand : EBYTE
BulletPoint : Antenna Cable
BulletPoint1 : Application: Vehicle positioning and navigation equipment; Wearable devices, such as GPS trackers; UAV positioning, industrial computers, etc.; Industrial equipment that requires GNSS positioning or navigation.
BulletPoint2 : E108-GN01 is a high-performance, highly integrated, low-power, low-cost multi-mode satellite positioning and navigation chip. It can be used for GNSS positioning applications such as car navigation, smart wearable, and drone.
BulletPoint3 : It also provides software and hardware interfaces compatible with other module manufacturers, which greatly reduces the user's development cycle and supports BDS / GPS / GLONASS / GALILEO / QZSS / SBAS.
BulletPoint4 : 10Hz D-GNSS differential positioning, A-GNSS assisted positioning, ephemeris prediction, DR integrated navigation application, the fastest data update rate is 10Hz
BulletPoint5 : 32-bit application processor, with a maximum frequency of 133MHz, for dynamic frequency adjustment
Color : Black
CompatibleDevices1 : GPS Navigation System
CompatibleDevices2 : Radio
ConnectorGender : Male-to-Male
ExternallyAssignedProductIdentifier1 : 193468644562
ExternallyAssignedProductIdentifier2 : 0193468644562
GpsrSafetyAttestation : 1
IncludedComponents : Antenna Cable
ItemName : EBYTE Satellite Positioning Module Chip E108-GN01 for BDS GPS GLONASS Galileo QZSS SBAS Navigation Systems
ItemPackageDimensions_Height : 5.9 inches
ItemPackageDimensions_Length : 12.3 inches
ItemPackageDimensions_Width : 9.4 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : gps-antennas
Manufacturer : EBYTE
ModelName : GM Original Equipment
ModelNumber : 84899890
NumberOfItems : 1
PackageLevel : unit
PartNumber : E108-GN01
ProductDescription : [Protocol]：NMEA0183 V4.1 and previous version，max updating frequency is 10Hz
[Certification]：Pending
[Package]：Half hole（SMT）
[Introduction]：E108-GN01 is a highly integrated, low-power, low-cost multi-mode satellite positioning and navigation chip. It can be used for GNSS positioning applications such as car navigation, smart wearable, and drone. It also provides software and hardware interfaces compatible with other module manufacturers,which greatly reduces the user's development cycle.

Features:
1. BDS/GPS/GLONASS/GALILEO/QZSS/SBAS joint positioning and single system independent positioning; 
2. 10Hz D-GNSS differential positioning, A-GNSS assisted positioning, ephemeris prediction, DR integrated navigation application, the fastest data update rate is 10Hz; 
3. 32-bit application processor, with a maximum frequency of 133MHz, for dynamic frequency adjustment; 
4. PPS output; 
5. Built-in reset controller; 
6. UART, SPI, I2C GPIO; 
7. RTC: Support 32.768 KHz ± 20 ppm crystal, 1.1V RTC clock output, support external signal wake-up; 
8. Output format: NMEA0183 V4.1 and previous versions, the maximum fixed update frequency can reach 10Hz; 
9. High sensitivity: -149dBm for cold start, -162dBm for hot start, -166dBm for tracking; 
10. Ultra-low power consumption: capture 30mA, track 20mA; 
11. The software and hardware are compatible with other manufacturers, which greatly reduces the user's development cycle.

Application:
1. Vehicle positioning and navigation equipment;
2. Wearable devices, such as GPS trackers;
3. UAV positioning, industrial computers, etc.;
4. Industrial equipment that requires GNSS positioning or navigation.
ProductSiteLaunchDate : 2021-03-25T01:29:37.627Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25173100
WarrantyDescription : 24 Months/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details