Cart 2 india

Specification
AgeRangeDescription : Youth
Brand : PATCHTOWN
BulletPoint1 : 2-inch x 3.375-inch embroidered patch
BulletPoint2 : Perfect for tactical gear, scout troops, or collecting!
BulletPoint3 : High-quality 100% embroidered patch
BulletPoint4 : Multiple patch backings to choose from! Select iron-on, hook-fastener, hook & loop fastener, or peel & stick adhesive. See details and application instructions in product description below.
BulletPoint5 : Red & black Raptor Dinosaur patch
Color : Blue
ExternallyAssignedProductIdentifier1 : 0700510541764
ExternallyAssignedProductIdentifier2 : 700510541764
ItemName : PATCHTOWN Minnesota State Flag Patch 3.375"" x 2"" (Hook-Fastener), Blue
ItemShape : Rectangular
ItemTypeKeyword : novelty-applique-patches
Manufacturer : Patchtown
Material : Thermoplastic Rubber or Polyvinyl Chloride
ModelName : MN Flag
ModelNumber : J15
MountingType : Iron-on, Hook-Fastener, Adhesive
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : 40331-J15
ProductDescription : High-quality 2-inch x 3.375-inch embroidered flag patch! Perfect for tactical gear, scout troops, or collecting! 100% embroidered patch with tidy merrow edge.
Choose from multiple backing options:
Iron-on: Standard iron-on patch. Iron on garment of your choice! Because iron-on is not a permanent fixture, we always recommend also stitching your patch in place. Iron-on may not be suitable for all surfaces, as heat may damage some fabrics and materials. Application: Place patch in desired location on garment, and cover with a spare piece of fabric. Using iron set to medium-high heat, apply firm pressure to patch with iron for 30-45 seconds. Turn garment inside out and repeat ironing on backside of patch. Allow to cool for 2 minutes. Check to see if glue has adhered. Repeat process as necessary.
Peel & Stick: No heat needed! This adhesive backing makes applying your favorite patches easier than ever before! This backing will stick to a variety of surfaces, including hard surfaces, synthetic materials, and natural fabrics. We find this backing to be stronger and longer lasting than traditional iron-on. Application: Clean desired surface thoroughly. Use pull tab to remove contact paper backing. Place the patch in the desired position and apply firm pressure for at least 60 seconds. Best applied at 75°F. This adhesive is pressure activated, so adequate pressure is important for the best application. Your patch will be fully bonded in 3 days. Fabrics laundered with applied patches should be tumble dried on low only. As always, we recommend also stitching your patch in place for the most permanent fixture.
Hook-Fastener: Pre-applied hook-side ONLY. Application: Patch comes with hook-fastener (the rough & rigid side) applied to the back. Perfect for existing loop-side surfaces.
Hook & Loop Fastener: Pre-applied hook-side fastener and matching loop-side piece. Application: Our patches come with hook-fastener (the rough & rigid side) applied to the back, and a separate loop-fastener piece (the soft, fuzzy side) for you to apply to the surface of your choice.
ProductSiteLaunchDate : 2024-04-22T19:57:27.804Z
Style : Hook-Fastener
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword1 : unisex-adult
TargetAudienceKeyword2 : boys
Theme : Flag
UnspscCode : 55121700
WarrantyDescription : N/a.