Cart 2 india

Specification
Brand : Bernette
BulletPoint : Bernette Binder Attachment B37 B38
BulletPoint1 : Cutex Brand products are sold and distributed exclusively by Cutex Sewing Supplies only, all others are NOT Cutex brand products and quality will not be guaranteed. Please be sure to check for Cutex brand and packaging for authenticity.
BulletPoint2 : Machine Mount Isolator Rubber Set compatible with Pegasus Industrial Coverstitch Machines.
BulletPoint3 : Compatible Part # : 206338.
BulletPoint4 : You will receive 4 rubbers compatible with use on one machine.
BulletPoint5 : Compatible with Pegasus models : W5, W6, W7 series coverstitch machines.
Color : Silver
ExternallyAssignedProductIdentifier : 5602401794936
ExternallyAssignedProductIdentifier1 : 0840272406892
ExternallyAssignedProductIdentifier2 : 840272406892
GpsrSafetyAttestation : 1
IncludedComponents : Carbon Brush with Spring
IsElectric : 1
ItemName : Bernette Binder Attachment B37 B38
ItemPackageDimensions_Height : 1.5 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sewing-machine-attachments
Manufacturer : usa
Material : Plastic
ModelName : B37 B38
ModelNumber : B37 B38
NumberOfItems : 1
PartNumber : CTX-206338
PowerSourceType : Manual
ProductDescription :
The Binder Attachment serves to bind edges with pre-folded or non-pre-folded bias tape in a finished width of 5 to 7 mm, which is sewn with a utility or decorative stitch.
The Bernette Binder Attachment is compatible with the Bernette 37 and Bernette 38 sewing machines.
Switch off the machine. Attach the foot as described in the instruction manual. Applications:
Binding edges with bias binding
Stitch type: straight stitch (alternative: narrow zigzag)
Stitch length: 2 - 2.5 mm (or as required)
Needle positioni centre
Feed dog: raised
Prefolded bias binding
It is possible to use bias binding with a width of 10-14 mm (final width 5-7 mm).
Non-prefolded bias binding
It is possible to use bias binding with a width of 23 mm (final width 5-7 mm).
Cut the bias binding diagonally at the start, insert into the guide of the binder, and if necessary push it through the hole with a needle or a pair of small scissors.
Guide the bias binding backwards under the foot.
Insert the edge of the fabric to be bound into the guide between the binding
If necessary, the needle position or the position of the guide channel can be adjusted by loosening the screw so to allow the bias binding to be sewn on close to the edge. Sew on the bias binding, ensuring that the bias binding and the fabric edge are guided in correctly.
ProductSiteLaunchDate : 2024-01-06T15:49:53.481Z
Size : 1pcs
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 44120000