SpecificationBrand : YFUSET
BulletPoint1 : Ultra-Compact Design:Mini digital amplifier (1.85 x 2.11 cm/0.73*0.83in) fits tight spaces in digital devices with high-efficiency amplification.
BulletPoint2 : Dual-Channel Stereo Output:5V USB power supply delivers 3W+3W to drive 4Ω/8Ω speakers using Class D technology for clear audio.
BulletPoint3 : Noise Suppression: Excellent noise suppression ensures that when there is no audio input, the ear close to the speaker cannot detect any noticeable noise.
BulletPoint4 : Crosstalk-Free Circuitry:Double-panel wiring solves ground balance and crosstalk between channels
BulletPoint5 : Diverse power supplies:The board can be powered via a computer's USB port (5V), a phone charger's USB port (5V), or a lithium battery.
Color : with potentiometer
ExternallyAssignedProductIdentifier1 : 0768365214691
ExternallyAssignedProductIdentifier2 : 768365214691
IncludedComponents : Module
ItemName : 5PCS PAM8403 2x3W Class D Digital Amplifier Board - Ultra-Mini Power Amplifier Module with 2.5-5V Input USB Power Supply for Audio Speakers and Sound Systems (with Potentiometer)
ItemPackageDimensions_Height : 0.2 inches
ItemPackageDimensions_Length : 0.2 inches
ItemPackageDimensions_Width : 0.19 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-audio-amplifiers
Manufacturer : YFUSET
Material : Copper
Material1 : Plastic
Material2 : Metal
MaximumSupplyVoltage : 12 volts
MinimumStorageTemperature : -5 degrees_celsius
MinimumSupplyVoltage : 12 volts
ModelName : evhooey2ggqz19sv
ModelNumber : ZGW-75
MountingType : Pcb Mount
NumberOfChannels : 2
NumberOfItems : 5
OperatingTemperature : 85 degrees_celsius
OutputPower : 10 watts
PackageTypeName : Box
PartNumber : ZGW-75
ProductDescription :
Product Introduction: PAM8403 mini Class D amplifier board
1. Working voltage: 2.5V-5.5V. Note: The power supply voltage should not exceed 5.5V, and the power supply should not be reversed.
2. Horn matching: 4-8 ohms, recommended: 4 ohms; Speaker power: 2-8W.
3. It can be powered by 5V power supply from the USB port of the computer, or by 5V power supply from the USB port of the mobile phone charger, or by lithium battery power supply.
4. High efficiency 90%, 4Ω load and 5V power supply, can provide 3W (left channel) + 3W (right channel) output power.
5. Class D power amplifier has high efficiency, will not affect the sound quality due to temperature rise, and does not need to add heat sinks, and occupies a small volume.
6. The power amplifier board has a built-in noise cancellation circuit, and there is no crackling noise when the power is turned on/off; The module has short-circuit, over-current protection and over-temperature protection.
7. Board size: 1.85*2.11cm
Apply:
LCD TV, monitor
laptop
Portable speakers
Portable DVD player, game console
Mobile/speakerphone
Precautions for use:
Turn on the speaker first and then turn on the power supply, otherwise it is easy to cause damage to the chip; Since the digital volume control in the module has a large gain, don't let the audio signal input be too large and cause the signal to cut and limit; The "negative" of the output end of the left and right channels cannot be connected together, otherwise the IC will be burned, and the horn (load) should be connected before powering on.
ProductSiteLaunchDate : 2025-03-01T14:32:33.338Z
SpecificationMet1 : Class D
SpecificationMet2 : 2 Channel Stereo
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SupplyCurrent : 0.3 amps
UnspscCode : 52161547
Voltage : 12 volts