Cart 2 india

Specification
Brand : Generic
BulletPoint1 : 250-watt Constant Voltage 25V
BulletPoint2 : 10/100 Ethernet comes standard
BulletPoint3 : DC voltage remote gain control
BulletPoint4 : Stepped, calibrated input attenuators
BulletPoint5 : Disable all front panel controls via software
IncludedComponents : No
ItemName : ne4250.25 4-Channels Network-Enabled Class-D Power Amplifier with Switching Power Supply, 250-Watt Constant Voltage 25V, Remote Turn On/Off, 4-Stage Level Meters, 10/100 Ethernet
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-audio-amplifiers
Manufacturer : Ashly
ModelName : QANYEGNgpxgouvfca
ModelNumber : ne4250.25
NumberOfItems : 1
PartNumber : ne4250.25
ProductDescription : Ashly ne4250.25 4-Channels Network-Enabled Class-D Power Amplifier with Switching Power Supply, 250-Watt Constant Voltage 25V, Remote Turn On/Off, 4-Stage Level Meters, 10/100 Ethernet

Connecting and controlling an amplifier for networked systems has now been simplified with Network-Enabled Amplifiers. This line offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea ne Software. No special outboard control units are needed. Choose either 4-channel ne4250 or 8-channel ne8250 amplifiers are rated at 250W per channel with separate HI-Z and LO-Z models.

KEY FEATURES
- 10/100 Ethernet comes standard
- 250-watt Constant Voltage 25V
- DC voltage remote gain control
- Ethernet remote control and monitoring
- Switch mode supply, Class-D output
- Stepped, calibrated input attenuators
- Remote turn on/off
- Disable all front panel controls via software
- Temperature-sensitive variable speed fan with side-to-front airflow
- Selectable HPF frequencies (80Hz, 400Hz, off)
- 4-stage level meters
- Output current and temp indicators
- Safety/Compliance: TUV, CE, FCC,RoHS

SPECIFICATIONS
- Frequency Response: 20Hz–20kHz, (unweighted) ±1dB
- Input Impedance: 20k Ohms, Balanced
- Voltage Gain: 26dB
- Input Sensitivity: 4.2dBu
- Maximum Input Level: +21dBu
- Signal to Noise (20-20k, Unweighted): >107db
- Distortion (8 Ohm load): (SMPTE) <0.5%, (THD-N) <0.5% (20Hz-20kHz)
- Damping Factor (8 Ohms, 1kHz): >250
- Output Circuitry: Class D
- AC Main: 120VAC or 240VAC ±10% (factory set), 50–60Hz
- Power Cable Connector: 15A Edison, 3-Prong IEC
- Airflow: IN through sides, OUT through front
- Environmental: 40-120°F noncondensing
- Dimensions: 19"W x 3.50"H x 16.84"D
- Weight: 23 lbs


ProductSiteLaunchDate : 2024-10-18T22:01:51.006Z
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 52161547