Cart 2 india

Specification
Brand : LASE
BulletPoint1 : Power Output :500W RMS (overall); 1000W (Peak) LF:400W RMS (800W Peak) @ 2 Ω HF: 100W RMS (200W Peak) @ 8Ω
BulletPoint2 : Frequency Response(± 0.3dB,1W/8Ω) : 54 Hz - 18 kHz Crossover Frequency : 1.8 Khz THD : 20 Hz - 20 kHz for 1 W <0.1%
BulletPoint3 : Signal-to-Noise Ratio : >135 dBA Channel separation : (Crosstalk) at 1 kHz >70 dB Input Connector (per channel):3-pin XLR,1/4" phono, electronically balanced
BulletPoint4 : Class :D
BulletPoint5 : Operating voltage : 220 V / 110 V 50/60 hz nominal
BulletPoint6 : Module Connect : Two Pin Molex: Red + / Black - to open end speakers wires.
ExternallyAssignedProductIdentifier1 : 0810175751665
ExternallyAssignedProductIdentifier2 : 810175751665
IncludedComponents : Amplifer Module
ItemName : PRX 600AB Amplifier Module for PRX 615M & 612M Powered Speakers (110V)
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-audio-amplifiers
Manufacturer : LASE
MaximumSupplyVoltage : 220 volts
ModelNumber : 110V
NumberOfChannels : 2
NumberOfItems : 1
PartNumber : EKX12P/15P
ProductDescription : LASE PRX 600AB Replacement Amplifier Module for PRX 615M & 612M Powered Speakers . Very Easy To Install. The LASE PRX 600A control panel is simple and neatly laid out, with the user controls being restricted to power, a rotary level control, and a pair of push switches for selecting 'EQ' Boost/Flat settings or Line/ Mic sensitivity. There are two XLR connectors, one for signal input and one for link out, so that additional speakers or systems can be daisy‑chained. The input socket is one of those handy 'combi' types, and will accept either a three‑pin XLR or a standard jack plug (balanced or unbalanced).
ProductSiteLaunchDate : 2025-01-09T19:52:10.458Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 52161547
Voltage : 220 volts_of_direct_current