Cart 2 india

Specification
Brand : Taramp's
BulletPoint1 : SPECIFICATION (1) || 1 Ohm VERSION || Nominal Power @12.6 VDC : 1 Ohm: 10,162W RMS | 2 Ohms: 6,080W RMS | 4 Ohms: 3,332W RMS || Nominal Power @13.8 VDC : 1 Ohm: 11,545W RMS | 2 Ohms: 7,366W RMS | 4 Ohms: 3,987W RMS || Nominal Power @14.4 VDC : 1 Ohm: 12,136W RMS | 2 Ohms: 7,787W RMS | 4 Ohms: 4,370W RMS || Number of Channels : 01 || Input Sensitivity : 0.22 V ~ 4 V || Signal to Noise Ratio : >90 dB || Frequency Response : 10 Hz ~ 5 KHz (-3 dB) ||
BulletPoint2 : SPECIFICATION (2) || Crossover high pass (HPF) : 10 Hz ~ 90 Hz (-12 dB/8ª) Variable || Crossover low pass (LPF) : 90 Hz ~ 5 KHz (-12 dB/8ª) Variable || Bass boost : 35 Hz ~ 55 Hz | 0 ~ +10 || Efficiency : 81% || Input Impedance : 10K Ohms || protection system : Short-Circuit in Relation to GND, Low Impedance, Low/High Voltage and Thermal Protection ||
BulletPoint3 : SPECIFICATION (3) || Minimum Supply Voltage : 9 VDC || Maximum Supply Voltage : 17 VDC || Consumption at rest : 4.2A || Maximum music consumption : 490A || Maximum consumption in sinusoidal signal : 980A || Dimensions (WxHxD) : 8.98" x 2.75" x 20.20" (228 x 70 x 513 mm) || Weight : 14.66 lb (6.65 Kg) || EAN : 7908706601510 ||
BulletPoint4 : Discover the power of the Taramps HD 10000, an amplifier that will elevate the performance of your sound system. With the 1 Ohm version you get an impressive 10,162 WRMS at 12.6V and can reach over 12,000 WRMS with a supply voltage of 14.4V. Its wide frequency response, which ranges from 10 Hz to 5 KHz, covers subbass, bass, mid-bass and midrange frequencies. Experience high-power sound performance, superior quality and unparalleled endurance, transforming your listening experience. ||
BulletPoint5 : This product is compatible with the Monitor Level Remote and LED Clip Monitor M1 accessories.
Color : #111
ExternallyAssignedProductIdentifier : 7908706601510
IncludedComponents : TARAMPS HD10000.1 Pro Car Audio Class D Amplifier 10000 Watts Sound System
ItemName : TARAMPS HD10000.1 Pro Car Audio Class D Amplifier 10000 Watts Sound System 1 Ohm Short-Circuit in Relation to GND, Low Impedance, Low/High Voltage Thermal Protection Covers Sub Bass Mid-bass Midrange
ItemPackageDimensions_Height : 2.75 inches
ItemPackageDimensions_Length : 20.2 inches
ItemPackageDimensions_Width : 8.98 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-audio-amplifiers
Manufacturer : Taramps
ModelName : Eujgoovcso1f2zm6g
ModelNumber : HD10000.1
MountingType : Rack Mount
NumberOfChannels : 4
NumberOfItems : 1
OperatingTemperature : 40 degrees_fahrenheit
OutputPower : 150 watts
PackageLevel : unit
PackageTypeName : Standard Packaging
PartNumber : HD 10000 - 1 OHM
ProductDescription : 1. The speaker board is made of 1.6mm PCB board, which bears a large load and is more practical.
2. With AC12-15V single power supply voltage, a group of electric energy can be sent to the amplifier board.
3. The circuit with UPC1237 chip has power‑on delay function, DC and power‑off damage functions.
4. The board is small in size, the circuit is and easy to weld, without debugging.
5. The board can be used with 1875 power amplifier board, and can also be used with LM3886, TDA7294, TDA7293, etc.

Spec:
Item Type: Speaker Board
Material: PCB
Chip Model: UPC1237

PackageList:
1 x Speaker Board
ProductSiteLaunchDate : 2025-03-21T08:00:01.000Z
SpecificationMet1 : TUV
SpecificationMet2 : CE
SpecificationMet3 : FCC
SpecificationMet4 : RoHS
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 52161500