Cart 2 india

Specification
AssemblyTime : 5 minutes
Brand : Dolphin
BulletPoint1 : Replacement Blue Communication Cable - 2 Wire, 60 Feet (w/ Swivel)
BulletPoint2 : Compatible with: M200, Nautilus CC Plus.
BulletPoint3 : Maytronics part number: 9995862-DIY
BulletPoint4 : Maytronics Certified Genuine Parts; Keep your Dolphin pool cleaner in top condition
BulletPoint5 : IMPORTANT NOTE: This replacement kit is an aftermarket product produced by CalPalmy (TM). It meets or exceeds the performance of OEM replacements (based on in-house testing). We do not have any affiliation with or endorsement from any of the manufacturers mentioned.
ControlMethod : touch
Directions : Disconnect the hose from the suction line and remove the cleaner from the pool. Only remove the hose after you are able to remove the cleaner from the water. Lay the cleaner upside-down and remove the four screws that seat the brush system. After unscrewing, lift out the cleaner's lower body assembly using the two openings on each side of the assembly. You can now begin to remove the cleaner's old vacuum skirt. Locate the old skirt's fasteners and slip out the tab to the opening until it is free. Remove all tabs that are attached to the supporting buttons/pins. Prepare the new vacuum skirt for installation. The word 'OUTSIDE' printed on the vacuum skirt should be visible from the outside after installation. Use this as a guide during installation. Start at the tab just after the word 'OUTSIDE', installing it on the largest button at the back of the cleaner's head. The direction where you install the skirt does not matter from here. Just ensure that the skirt is flush against the pool cleaner head's stop strips. Be careful not to dislodge the skirt as you insert the lower body assembly over the brush system. Reassemble and refasten the screws. Your pool cleaner is now ready to resume its duty.
ExternallyAssignedProductIdentifier1 : 0718117204968
ExternallyAssignedProductIdentifier2 : 718117204968
InstallationType : Self-installation
IsAssemblyRequired : 1
ItemName : Dolphin Genuine Replacement Part — Durable 60 FT Blue Cable with Swivel for Tangle-Free Operation — Part Number 9995862-DIY
ItemPackageDimensions_Height : 49.53 centimeters
ItemPackageDimensions_Length : 8.89 centimeters
ItemPackageDimensions_Width : 49.53 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : swimming-pool-automatic-cleaner-replacement-parts
Manufacturer : Maytronics
Material : Rubber
ModelNumber : 9995862-DIY
NumberOfItems : 2
PartNumber : ARZOM9995862-DIYL12B
Pattern : Solid
ProductDescription : Genuine Dolphin Replacement Part — Durable 60 FT Blue Cable with Swivel for Tangle-Free Operation — Part Number 9995862-DIY
Size : 2-Pack
SupplierDeclaredDgHzRegulation : not_applicable