Cart 2 india

Specification
Brand : AccurateDiesel
BulletPoint : For Volkswagen and VW based Dune Buggies
BulletPoint1 : Compatible with Ford SuperDuty 1978 - 2016
BulletPoint2 : Dana 50 / Dana 60 Applications
BulletPoint3 : Repair oil leaking from ends of front axle tubes
BulletPoint4 : Allows installation of expensive oil bath seals without damaging them
BulletPoint5 : Approximately 1/3 the price of factory tooling / MADE IN THE USA
Color : silver
ExteriorFinish : Machined
ExternallyAssignedProductIdentifier1 : 843885003441
ExternallyAssignedProductIdentifier2 : 0843885003441
ExternallyAssignedProductIdentifier3 : 00843885003441
FinishType : Powder Coated
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
IncludedComponents : Pinion Flange Holding Tool
IsAssemblyRequired : 1
ItemName : AccurateDiesel Inner Axle Seal Installer Compatible with Ford Super Duty 1978-2016 (Dana 50 and 60)
ItemPackageDimensions_Height : 17.4 centimeters
ItemPackageDimensions_Length : 7.1 centimeters
ItemPackageDimensions_Width : 8.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-axle-tools
Manufacturer : AccurateDiesel
Material : Steel
ModelName : Aramoxqam2we9d5k
ModelNumber : 8542035362
NumberOfItems : 1
OperationMode : Mechanical
PartNumber : MP608
PartTypeId : 19113
ProductDescription : Is there oil leaking out the ends of the front axles tubes on your Super Duty Ford truck? If so, it is time for some new inner axles seals. If you have ever attempted this job before, you know that installing these oil-bath design seals is nearly impossible without the correct tools. Improvised methods involving boards, sockets, or hammers will result in collapsing the expensive seals, requiring the job to be repeated. Unfortunately, the factory tools are not very affordable at upwards of $300 and can still damage the seal if the technician is not extremely cautious. Our Super Duty Inner Axle Seal Installer allows one technician working alone to install each seal in minutes to the correct depth without seal damage. Rather than using a spreader concept like the factory tool, our Dana 50/ 60 inner axle seal tool allows the seal to be driven in from the end of the axle using the technician's own 1/2 inch drive extensions to reach through the axle housing. No damage is done to the extensions since a 1/2 inch driving adapter is supplied with the kit. This tool will pay for itself in one job! Kit contents: Ford axle seal driver and 1/2 inch driving adapter. 1/2 inch extension is shown for illustrative purposes only - customer will need to supply their own 1/2 inch extensions. Please see our website for full instructions with pictures. Made in the USA in the State of Michigan!
ProductSiteLaunchDate : 2012-02-23T13:12:03.086Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25170000
WarrantyDescription : 12 Months Warranty