Cart 2 india

Specification
Brand : Sturdy Built
BulletPoint : Boat trailer axle
BulletPoint1 : Hubface measurement - 53"
BulletPoint10 : Hot-Dipped Galvanized to prevent corrosion
BulletPoint2 : Outside of torsion bracket - 46"
BulletPoint3 : 30 Degree Down Starting Angle
BulletPoint4 : 5 on 4 1/2" bolt pattern
BulletPoint5 : Starting angle height (full load) - 2.04
BulletPoint6 : 1,500 lb Capacity
BulletPoint7 : 2-Hole Brake Flange for installing Brakes
BulletPoint8 : V Bend Style Torsion Axle with drain hole
BulletPoint9 : Grease-able spindle
Color : Black
CompatibilityOptions1 : Jet Ski Trailer
CompatibilityOptions2 : Boat Trailer
CompatibilityOptions3 : Jon Boat Trailer
CompatibleWithVehicleType : Trailer
ExternallyAssignedProductIdentifier : 7437563077287
FabricType : Iron
FinishType : Powder Coated
FitType : Universal Fit
IncludedComponents : (1) Galvanized Jet Ski/Personal Watercraft Trailer Torsion Axle 53" Hub Face
IncludedComponents1 : (1) Galvanized 86.5 inch Hub Face Straight Trailer Axle
IncludedComponents2 : (2) Pre-installed and Greased 5 on 4.5" Bolt Pattern Galvanized Trailer Hubs
IncludedComponents3 : (2) Galvanized Spring Seats (for installation to your trailer leaf springs)
IsAssemblyRequired : 1
ItemName : Sturdy Built Galvanized Knott Jetski - Boat Trailer Torsion Axle 1,500lb Capacity 5 Lug 53 inch Hub Face, 26946
ItemPackageDimensions_Height : 8 inches
ItemPackageDimensions_Length : 60 inches
ItemPackageDimensions_Width : 14 inches
ItemPackageQuantity : 1
ItemTypeKeyword : trailer-axles
Manufacturer : Sturdy Built
Material : Galvanized Steel
Material1 : Alloy Steel
Material2 : Stainless Steel
MetalType : Alloy Steel
ModelName : Torsion Axle for 46" I Beam Trailer Frames
ModelNumber : 26946
NumberOfBoxes : 1
NumberOfItems : 1
OeManufacturer : Universal Fit
PartNumber : 26946
ProductDescription : This 1,500lb capacity Galvanized Boat Trailer Axle is designed to fit a 46inch wide I-Beam Trailer. The Hub Face (Track Measurement) on this Torsion Axle Measures 53 inches. It comes equipped with Galvanized 5 Lug Idler Hubs and features a greasable spindle, along with the standard 1.98 inch Accu-Lube Style Dust Cap so you can easily add grease to the Bearings for maintenance. It also features a 2 Hole Brake Flange for installing Trailer Disc Brakes, and measures 46 inches from Brake Flange to Brake Flange, and 46 inches to the Outside of the Torsion Mounting Bracket. The Starting Angle of this Torsion Style Boat and Jetski Trailer Axle is 30 Degrees Down. Torsion Bar Axles are perfect for Salt Water Jetski Trailers because they last longer than Leaf Springs, which tend to rust quickly. The hubs are included pre-installed on this Torsion Axle. The Trailer Hubs use standard 44649 Bearings (1 1/6" inner diameter) for both the outer and inner bearings. The Seal Size for this galvanized hub is 1.25 inches inner diameter. The Boat Trailer Hub uses the standard size lug nuts for trailer hubs and wheels, ½”x20, and the bolt pattern measures 4.5 inches. The axle/hub does not include brakes, but there is a 2 hole brake flange (2 7/8 inches center to center) on the Torsion Arm so you can mount disc brakes to it, or swap out the hub to drum if you prefer. This Model Torsion Axle typically would use 4.80 x 12, 5.30 x 12, or ST145 R12 Trailer Tires depending upon the trailer. However, this jet ski torsion axle sku is not compatible with 18x8.5x8 or 20.5x8x10 trailer tire and wheel sizes. This pre-installed hub is already greased with a Lithium Based Grease. Additional Lithium Grease may be applied before use.
ProductSiteLaunchDate : 2025-02-10T08:00:00.000Z
Size : TSS-107-40
Style : fashion
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26111500
WarrantyDescription : 1 Year Warranty