Cart 2 india

Specification
Brand : OTC
BulletPoint : OEM replacement part
BulletPoint1 : Use with ball joint service set numbers 6530, 7248, and 7249
BulletPoint2 : To service GM's 1996 to 2001 4WD 1/2 and 3/4 ton pickups Suburban, Yukon, and Tahoe SUVs
BulletPoint3 : Easily remove or install either aftermarket or original equipment press-fit lower ball joints
BulletPoint4 : [BLOW MOLD CASE] - Packaged in a red blow-mold case for storage and carrying
BulletPoint5 : [HEAVY DUTY] - Manufactured by K Tool International. KTI leads the market by ensuring that its products are rugged, reliable and reasonably priced.
Color : Black
CustomerPackageType : Standard Packaging
ExteriorFinish : Polished
ExternallyAssignedProductIdentifier1 : 731413028335
ExternallyAssignedProductIdentifier2 : 0731413028335
ExternallyAssignedProductIdentifier3 : 00731413028335
FinishType : Powder Coated
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
IncludedComponents : Ball Joint Separator
IncludedComponents1 : C-Frame
IncludedComponents2 : Forcing Screw
IncludedComponents3 : Receiver Tubes
IncludedComponents4 : Removing/Installing Adapters
IncludedComponents5 : Storage Case
ItemDisplayDimensions_Height : 5.6 inches
ItemDisplayDimensions_Length : 16.2 inches
ItemDisplayDimensions_Width : 16.1 inches
ItemDisplayWeight : 13.95 pounds
ItemName : OTC (7920) Car Ball Joint Adapter Set - GM 4WD
ItemPackageDimensions_Height : 19.7 centimeters
ItemPackageDimensions_Length : 8.5 centimeters
ItemPackageDimensions_Width : 11.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-ball-joint-tools
Manufacturer : OTC
Material : Plastic
ModelName : Ball Joint Service Tool and Master Adapter Set
ModelNumber : 7920
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Mechanical
PartNumber : 7920
ProductDescription :

Ball Joint Separator Remover Tool Fit for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATV | Universal Ball Joint Separator

ADJUSTABLE

This ball joint removal tool has an adjustable opening range from 1-1/8 inches to 2-1/8 inches to fit most passenger vehicles.

HEAVY-DUTY CONSTRUCTION

The ball joint separator tool features a strong steel construction and a black oxide pin for strength and durability

EASY TO USE

1. Slip the forked end between the boot and metal attachment point, be sure the pivot finger is squarely on the threaded end, and tightening the bolt until you have a good amount of resistance

2. Tap the attachment point and or the finger with a hammer and tighten some more and tap again

3. When the stud comes loose, it will be all at once as the tool falls free and you will hear a “pop”

SPECIFICATION

Name: Ball Joint Separator

Color: Black/white

Packing quantity:

1 X ball joint separator tool

ProductSiteLaunchDate : 2014-08-29T14:38:47.809Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25170000
WarrantyDescription : 1 year manufacturer warranty