Cart 2 india

Specification
Brand : uxcell
BulletPoint : Category: Machining -- Milling
BulletPoint1 : Tapered Ball Nose End Mill: Cutting radius: 0.75mm / 0.03"; cutting dia.: 1.5mm / 0.06"; cutting flute length: 10mm / 0.39"; shank diameter: 6mm / 0.24"; overall length: 45mm / 1.8"; milling angle: 30 degree; cutting hardness: HRC42 (max.).
BulletPoint2 : Wide Applications: Suitable for milling and cutting of stainless steel, carbon steel, malleable cast iron, alloy steel, etc. For slot and hole machining. Special milling cutter for high-speed cutting applications with high hardness.
BulletPoint3 : Features: Ball end cut, 2-flute design. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. Features just the base substrate without any coatings, good for general purpose milling in wide ranges of applications.
BulletPoint4 : Tungsten Carbide Tool: Made of 0.6um micro-grain tungsten carbide, the end mill has higher hardness (HRC92) and strength, better wear resistance and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency.
BulletPoint5 : Tips: Use on CNC machining centers, engraving machines and other high-speed CNC machine tools. When working, it is necessary to add cutting fluid to protect the cutting edge and make the cutting smoother. The longer the length of the tool clamped by the chuck, the better.
CutType : Finishing
CutType1 : Rounded
CutType2 : Finishing
EndCutType : Ball End
FinishType : Nano Coated
ItemName : uxcell Tapered Ball Nose End Mill, Uncoated Solid Carbide 2 Flute Spiral Milling Cutter, 0.75mm Radius, 1.5mm Diameter, 6mm Shank, 45mm Length, 30 Degree Angle
ItemPackageDimensions_Height : 9.144 centimeters
ItemPackageDimensions_Length : 1.524 centimeters
ItemPackageDimensions_Width : 6.096 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : ball-nose-end-mills
Manufacturer : uxcell
Material : Tungsten Carbide
ModelNumber : a22051400ux0770
NumberOfCuttingEdges : 2
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : a22051400ux0770
ProductDescription : Specifications:
Cutting Radius: 0.75mm / 0.03"
Cutting Diameter: 1.5mm / 0.06"
Cutting Flute Length: 10mm / 0.39"
Shank Diameter: 6mm / 0.24"
Overall Length: 45mm / 1.8"
Milling Angle: 30 Degree
Material: Tungsten Carbide (HRC92)
Finish: Uncoated
End Cut Type: Ball End
Number of Flutes: 2 Flutes
Cutting Hardness: HRC42 (Max.)
Spiral Flute Angle: 35 Degree
Package Content: 1pcs x Tapered Ball Nose End Mill


Descriptions:Made of 0.6um micro-grain tungsten carbide, the end mill has higher hardness (HRC92) and strength, better wear resistance and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
Suitable for milling and cutting of stainless steel, carbon steel, malleable cast iron, alloy steel, etc. For slot and hole machining. Special milling cutter for high-speed cutting applications with high hardness.
Features ball end cut, 2-flute design. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. Features just the base substrate without any coatings, good for general purpose milling in wide ranges of applications.
Use on CNC machining centers, engraving machines and other high-speed CNC machine tools. When working, it is necessary to add cutting fluid to protect the cutting edge and make the cutting smoother. The longer the length of the tool clamped by the chuck, the better.
Tips: Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.

ProductSiteLaunchDate : 2022-07-21T22:21:50.196Z
Size : 0.75mm x 10mm x 6mm x 45mm
SupplierDeclaredDgHzRegulation : not_applicable
ToleranceHeld : Precision
UnitCount : 1
UnspscCode : 27112803