Cart 2 india

Specification
Brand : AF
BulletPoint : New
BulletPoint1 : The quarter turn valve control makes it easier to operate and requires little to no maintenance.
BulletPoint2 : Low pressure valve with ability to withstand working pressure up to 1000 PSI. Allows maximum flow capacity with minimum pressure drop.
BulletPoint3 : Reduced bore ball valve type. A type of valve with smaller internal diameter.
BulletPoint4 : Consists of a body & end connection made up of a single piece of material. Has a solid cast body that decreases risk of leakage.
BulletPoint5 : Made of stainless steel 316 material. 2 female NPT threaded ends on both sides. Works well in temperature range of -29°C to 150°C.
Color : White
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 8886481764332
ExternallyAssignedProductIdentifier1 : 719249207414
ExternallyAssignedProductIdentifier2 : 0719249207414
ExternallyAssignedProductIdentifier3 : 00719249207414
ExternallyAssignedProductIdentifier4 : 0011651142216
ExternallyAssignedProductIdentifier5 : 00032888071384
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
Hazmat : auto-grounding
IncludedComponents : Plumbing Fixtures;Kitchen Faucets and Accessories;faucet-balls
IncludedComponents1 : Ball Valve
IncludedComponents2 : 2 rubber rings
ItemDisplayWeight : 0.23 kilograms
ItemName : 1/4" NPT 1 Piece Reducing Ball Valve, AF Hydro Stainless Steel SS316 Standard for Water, Oil and Gas
ItemPackageDimensions_Height : 9.6 centimeters
ItemPackageDimensions_Length : 1.9 centimeters
ItemPackageDimensions_Width : 7.9 centimeters
ItemPackageQuantity : 1
ItemShape : Inline
ItemTypeKeyword : industrial-ball-valves
Manufacturer : AF
Material : Stainless Steel
MaximumOperatingPressure : 1000 pounds_per_square_inch
ModelName : EBV-2000-T
ModelNumber : VL-B-S-1-N-04
NationalStockNumber : 4820-01-602-1054
NumberOfItems : 1
NumberOfPorts : 1
PartNumber : VL-B-S-1-N-04
PartTypeId : 20741
ProductDescription : Low pressure ball valves are generally used in water, oil, and gas applications. Also known as a shut-off valve, ball valves are used to control fluid movement. They are used to ensure smooth operation within the system. Ball valves are easy to handle and they require minimal maintenance due to their quarter turn valve control feature. There are three types of low-pressure ball valve; 1 piece, 2 and 3 piece. Depending on the flow of passage, these ball valves are designed either full bore or reduced ball valve. A 1-piece ball valve is made up of a single piece of material with a solid cast body that is able to minimize leakage. The ball valve trim and seals are loaded from one side of the end connection. 1-piece ball valve is always a reduced bore ball valve. It means that the valve has a smaller bore diameter than the pipe’s internal diameter. The port size is unequal to the line size. This 1-piece body design is low-cost, but the valve cannot be taken apart from cleaning. The 1-piece ball valve offered is made of stainless steel SS316 material, and it can withstand up to 1000 PSI of working pressure. The connection type is NPT. 1 piece ball valve can withstand temperature between -29°C to 150°C.
ProductSiteLaunchDate : 2022-12-27T09:50:12.380Z
Size : 0.25 Inch
SpecificationMet : WOG
SpecificationMet1 : CSA
SpecificationMet2 : ULC
Style : Pack of 2
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : Ball Valve