Cart 2 india

Specification
Brand : AF
BulletPoint1 : The quarter turn valve control makes it easier to operate and requires little to no maintenance.
BulletPoint2 : Low pressure valve with ability to withstand working pressure up to 1000 PSI. Allows maximum flow capacity with minimum pressure drop.
BulletPoint3 : Full bore ball valve type. A type of valve with an over-sized ball which makes the size of the port equals to pipeline.
BulletPoint4 : Consists of two separated pieces; One piece of end connection and the body, and the second piece that fits into the first and provide the second end connection. This design increases sealing & allow easy disassembly when required.
BulletPoint5 : Made of stainless steel 316 material. 2 female NPT threaded ends on both sides. Works well in temperature range of -29°C to 150°C.
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 8886481764585
GpsrSafetyAttestation : 1
ItemName : AF Hydro 3/4'' NPT 2 Piece Reducing Ball Valve, Stainless Steel SS316 Standard for Water, Oil and Gas with Blue Locking Handles
ItemPackageDimensions_Height : 15 centimeters
ItemPackageDimensions_Length : 7.7 centimeters
ItemPackageDimensions_Width : 10.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-ball-valves
Manufacturer : AF
Material : Stainless Steel
MaximumOperatingPressure : 1000 pounds_per_square_inch
ModelNumber : VL-B-S-2-1-N-12
NumberOfItems : 1
NumberOfPorts : 2
PartNumber : VL-B-S-2-1-N-12
ProductDescription : Low pressure ball valves are generally used in water, oil, and gas applications. Also known as a shut-off valve, ball valves are used to control fluid movement. They are used to ensure smooth operation within the system. Ball valves are easy to handle and they require minimal maintenance due to their quarter turn valve control feature. There are three types of low-pressure ball valve; 1 piece, 2 and 3 piece. Depending on the flow of passage, these ball valves are designed either full bore or reduced ball valve. 2-piece ball valve is a full-bore ball valve. The valve has the same diameter as the pipe’s internal diameter. 2-piece ball valve is commonly used. The body consists of two separate pieces that are connected using adapter. The first piece is the body itself and one end of the connection. The second piece holds the trim in place and provides the other connection end. This design allows disassembly. The 2-piece ball valve offered is made of stainless steel SS316 material, and it can withstand up to 1000 PSI of working pressure. The connection type is NPT. 2-piece ball valve can withstand temperature between -29°C to 150°C.
ProductSiteLaunchDate : 2022-12-29T06:48:31.104Z
Size : 0.75 Inch
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : Ball Valve