Cart 2 india

Specification
Brand : Hyuduo
BulletPoint1 : 360-degree rotation: the angle valve can indicate the visual position, and can be connected to a limit switch or an emergency manual device. The air head can rotate 360 degrees, and even the limit switch can rotate 360 degrees. Easy to install one or two limit switches
BulletPoint2 : Maintenance-free: Stainless steel angle seat valve has a low-wear piston structure, easy to operate and low air consumption, no internal self-lubrication, and maintenance-free.
BulletPoint3 : Built-in metal connector: When fluid flows in from above the valve stem, a smaller control head is optional, and the built-in metal connector is easy to connect, and the PTFE seal is plugged to prevent dust from entering.
BulletPoint4 : Low air consumption: Thickened engineering plastic shell, safe and reliable, and long service life.
BulletPoint5 : Good fluidity of fluid: When fluid flows out from below the valve stem, it will not absorb water hammer, water hammer (water impact), the rate is 30% larger than ordinary angle seat valve, the volume is small, the fluid fluidity is good.
Color : As Picture Show
ConnectorType : Threaded
ExteriorFinish : Metal,Plastic,Stainless Steel
ExternallyAssignedProductIdentifier : 8930847146994
ExternallyAssignedProductIdentifier1 : 300691904657
ExternallyAssignedProductIdentifier2 : 0300691904657
IncludedComponents : inc
IncludedComponents1 : Actuator
IncludedComponents2 : Valve Body
ItemName : Angle Seat Valve, Turn Brass Angle Stop Valve Air Actuated Female Thread Stainless Steel Pneumatic Steam Valve(1/2in; 3/4in)(3/4 DN20)
ItemPackageDimensions_Height : 21 centimeters
ItemPackageDimensions_Length : 7.8 centimeters
ItemPackageDimensions_Width : 9.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-ball-valves
Manufacturer : Hyuduo
Material : Stainless Steel
Material1 : Plastic
Material2 : Brass
MaximumOperatingPressure : 145 pounds_per_square_inch
ModelName : A20-T15-B3-B
ModelNumber : 1/2 inch
NumberOfItems : 1
NumberOfPorts : 2
PartNumber : Hyuduopxh1giw9oq-12
ProductDescription : Specification:
IteItem Type: Angle Seat Valve
Material: Stainless steel
Standard(optional): DN15 (1/2in), DN20 (3/4in)
Connection Form: Thread
Pressure Environment: Atmospheric Pressure
Use: Inverting
Bore Diameter: 50mm
Spool Sealing: PTFE
Stem Sealing: PTFE/FKM
Piston Sealing: FKM/NBR
Applicable Medium: Water, Neutral Gas or Liquid, Alcohol, Oil, Organic Solvent, Weak Acid or Weak Alkaline Solution
Medium Temperature: PTFE: -10 ~ +180
Ambient Temperature: -10~ +60
Viscosity: Up to 600mm²/S
Control Medium: Air/Neutral Gas
Control Pressure Range: 0.3-1MPa
Widely Used: Beer and beverage, textile printing and dyeing, pharmaceutical, food processing, rubber machinery, organic or inorganic chemicals, high temperature sterilization, water/sewage treatment

Package List:
1 x Angle Seat Valve


ProductSiteLaunchDate : 2020-09-24T12:18:40.813Z
Size : 3/4“ DN20
SpecificationMet : EN 1074-1, ASTM, EN, ISO
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : angle stop valve