Cart 2 india

Specification
Brand : Dixon
BulletPoint : Adjustable
BulletPoint1 : Clamp ear is dimpled for increased clamp force
BulletPoint2 : Visible deformation of ear for evidence of proper closure
BulletPoint3 : Mechanical interlock for secure closure and better corrosion resistance than a spot-weld
BulletPoint4 : Stainless steel for resisting scaling and corrosion
BulletPoint5 : Perfect for Plumbing Repairs, Automotive Repairs, or Other Various Uses
Color : Silver
ExternallyAssignedProductIdentifier : 00810083553146
ExternallyAssignedProductIdentifier1 : 765629774380
ExternallyAssignedProductIdentifier2 : 0765629774380
ExternallyAssignedProductIdentifier3 : 00743153843437
IncludedComponents : Adjustable crimp heads
ItemDisplayWeight : 0.23 pounds
ItemName : Dixon F Series Stainless Steel Pre-Formed Center Punch Band Clamps, 5/8" Bandwidth - 1-1/2" ID (100 Pack)
ItemPackageDimensions_Height : 1.778 centimeters
ItemPackageDimensions_Length : 14.732 centimeters
ItemPackageDimensions_Width : 13.208 centimeters
ItemPackageQuantity : 1
ItemShape : Band_and_clamp
ItemTypeKeyword : band-hose-clamps
Manufacturer : Dixon
Material : Stainless Steel
ModelName : Multi-Tool
ModelNumber : FS6
NumberOfItems : 1
PartNumber : FS6
ProductDescription : Dixon Style F Preformed Band Clamps are from their F Series line of center punch bandclamps. These center punch hose clamps are compatible with the F1, F38, F40, and F100 Band Clamp Hand Tools (other manufacturer punch style tools may also be used). F Series Band Clamps come pre-formed in a given diameter with the tailpiece already through the buckle and must be slid over the hose end. F and FO Series Clamps are available in Galvanized Steel or Stainless Steel (300 Series Band, 302 Series Buckle) and are double-wrapped, triple-punched, and hold permanently. Sold in package quantities only, quantity varies with size of clamp. Please reference chart below for bandwidth and package quantity for these Pre-Formed Dixon Center Punch Band Clamps.

The use of band style clamps is a proven method of retaining hose couplings in industrial hose applications. To achieve proper retention and sealing of the hose coupling in the hose, it is imperative that these clamps be installed correctly. Please follow the manufacturerÃs recommendations as to the proper selection and installation of band clamps. When installing multiple clamps the buckles must be offset around the hose, eliminating the possibility of a straight line leak under the buckle area.

The first clamp should be installed just inside the mark on the hose furthermost from the hose end (reference page 11). Leaving excess band material turned back over the buckle does not improve the performance of the clamp. In fact, a safety hazard develops from this practice by leaving sharp edged material exposed.
ProductSiteLaunchDate : 2016-04-08T14:55:19.895Z
Size : 11.4 millimeters
Style : Heavy duty
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 100
UnspscCode : 31162900