Cart 2 india

Specification
Brand : MAGNATE
BulletPoint : 12' 10-1/2" (12 feet 10-1/2 inch) Long; 0.035" Thickness; .073" Kerf
BulletPoint1 : EVERLASTING : DNLK band saw tires are made of high-grade, friction-resistant, ultra-durable urethane with superior load-bearing capacity and thermostability. We guarantee dependable performance in both cold and hot environments.
BulletPoint2 : MADE IN THE USA: Our urethane tires for bandsaws are EXCLUSIVELY designed and produced in the USA under rigorous quality control by certified authorities.
BulletPoint3 : OUTSTANDING PERFORMANCE: Each Blue Max band saw tire features an evenly distributed embossed AcutrackTM finish for preciseblade tracking, superior noise reduction and shockabsorption.
BulletPoint4 : NO ADHESIVE, NO SOAKING NEEDED: Our set of 2 urethane bands comes with the necessary tools for quick and easy bandsaw wheel replacement.
BulletPoint5 : DNLK urethane band saw tire will fit General 90125-14 14 Inch band saw
Color : Blue
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Metal
CompatibleMaterial3 : Aluminum
CompatibleMaterial4 : Copper
CompatibleMaterial5 : Brass
ExternallyAssignedProductIdentifier1 : 0764968959328
ExternallyAssignedProductIdentifier2 : 764968959328
ItemDisplayDimensions_Length : 12 inches
ItemDisplayWeight : 2.44 pounds
ItemName : Magnate M154.5C1H6 Carbon Steel Bandsaw Blade, 154-1/2" Long - 1" Width, 6 Hook Tooth
ItemPackageDimensions_Height : 9 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 6 inches
ItemShape : Circular
ItemTypeKeyword : band-saw-blades
Manufacturer : Magnate
Material : Steel Alloy
ModelNumber : 90125-14
NumberOfTeeth : 6
PartNumber : M154.5C1H6
ProductDescription : Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material. All bandsaw blades carried by Magnate (TM) are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. If the teeth of the bandsaw blade are pointing in the opposite direction of your machine, flip the blade inside out. Warning: For packaging purposes, this blade is folded into a coiled position similar to a spring and may pop open during coiling or uncoiling. Wear heavy-duty leather gloves and eye/body protection, and exercise extreme caution when handling the blade. Failure to do so could result in serious bodily injury. Refer to your bandsaw owner's manual for further safety instructions.
ProductSiteLaunchDate : 2007-12-25T07:11:02.000-00:00
Style : Compact
UnitCount : 2
UnspscCode : 27112700