Cart 2 india

Specification
Brand : MAGNATE
BulletPoint : 0.025" Thickness; .049" Kerf; 13 ft. 11 inch Long
BulletPoint1 : 0.042" Thickness; To be used to cut 1-in to 6-in (taller if fed slow) wood or 3-in to 11-in steel
BulletPoint2 : 13 ft. 11 inch Long
BulletPoint3 : ☂ Applicable Smooth Transition Height 1.57 in: Perfect suitable for the threshold transition where the height difference between the carpet/floor/door/carpet/tile and the ground is within 2 cm (0.78 inch) to 4 cm (1.57 inch)
BulletPoint4 : ☂ Easy to Cut & Install The floor strip is easy to install, no need to punch, no need to tighten screws, simple installation, you can adjust the height and length of your own use.
BulletPoint5 : ☂ Suitable for Any High Traffic Area: Our edging trim strip level out possible differences of levels like of vinyl planks, concrete floor, tile, LVT, hardwood floor, laminate, sweeping robot ramp etc.
Color : One Color
CompatibleMaterial1 : Metal
CompatibleMaterial2 : Aluminum
CompatibleMaterial3 : Copper
CompatibleMaterial4 : Brass
ExternallyAssignedProductIdentifier : 8144691637663
ExternallyAssignedProductIdentifier1 : 0764968993513
ExternallyAssignedProductIdentifier2 : 764968993513
ItemDisplayDimensions_Length : 2 inches
ItemDisplayWeight : 0.66 pounds
ItemName : Magnate M167C38R18 Carbon Steel Bandsaw Blade, 167" Long - 3/8" Width, 18 Raker Tooth
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : band-saw-blades
LoadCapacity : 550 pound
Manufacturer : Magnate
Material : Carbon Steel
ModelName : Chenxin's Store
ModelNumber : Chenxin's Store
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : M167C38R18
ProductDescription : Carbon tool steel bandsaw blades are designed to work with a woodcutting saw  to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material,* 14 raker to cut 3/16" to 7/16" thick material,* 10 raker to cut 1/4" to 5/8" thick material,* 6 Hook to cut 3/8" to 2" thick material,* 4 Hook to cut 3/4" to 4-1/2" thick material,* 3 Hook to cut 1" to 6" thick material,* 2 Hook to cut 2" to 12" thick material. All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Warning: For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when being coiled or uncoiled. Wear heavy duty leather gloves and eye/body protection while using extreme care when coiling or uncoiling a blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual to make sure the blade's length, width and thickness can fit your bandsaw machine.
ProductSiteLaunchDate : 2019-12-23T23:29:23.800Z
Size : 3pcs
Style : Compact
UnitCount : 1