Cart 2 india

Specification
Brand : MAGNATE
BulletPoint : 5' 10-1/2" (5 feet 10-1/2 inch) Long; 0.025" Thickness
BulletPoint1 : 10' 11-1/2" (10 feet 11-1/2 inch) Long, 10' 11-1/2" (10 feet 11-1/2 inch) Long; 0.025" Thickness
BulletPoint2 : .047" Kerf
CompatibleMaterial1 : Metal
CompatibleMaterial2 : Aluminum
CompatibleMaterial3 : Copper
CompatibleMaterial4 : Brass
CompatibleMaterial5 : Brass
ExternallyAssignedProductIdentifier1 : 0764968915713
ExternallyAssignedProductIdentifier2 : 764968915713
ItemDisplayDimensions_Length : 10 inches
ItemDisplayWeight : 0.52 pounds
ItemName : Magnate M70.5M38V14 Bi-Metal Bandsaw Blade, 70-1/2" Long - 3/8" Width, 14-18 Variable Tooth
ItemTypeKeyword : band-saw-blades
Manufacturer : Magnate
Material : Steel Alloy
NumberOfTeeth : 6
PartNumber : M70.5M38V14
ProductDescription : All bandsaw blades carried by Magnate (TM) are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item. Bi-Metal band saw blades are designed to work with a woodworking saw at a speed range of 800-3,500 fpm to cut plastics, all types of woods ( especially ideal for hard woods i.e. oak, maple, walnut or cherry), plastics, and non-ferrous metals (aluminum, copper, brass, etc). To cut ferrous metal (i.e. carbon steels, light alloy steels, mold steels, and tool steels), you must only use a metal-cutting bandsaw, at a speed range of 40 - 200 fpm. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 20 - 24 variable to cut 1/16" to 1/4" thick material, * 14 - 18 variable to cut 1/8" to 3/8" thick material, * 10 - 14 variable to cut 3/16" to 7/16" thick material, * 8 - 12 variable to cut 1/4" to 1/2" thick material, * 6 - 10 variable or 6 Hook to cut 5/16" to 5/8" thick material, * 5 - 8 variable or 6 Hook to cut 3/8" to 1" thick material, * 4 - 6 variable or 6 Hook to cut 1/2" to 2" thick material, * 3 - 4 variable or 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material. If the teeth of the bandsaw blade are pointing in the opposite direction of your machine, flip the blade inside out. Warning: For packaging purposes, this blade is folded into a coiled position similar to a spring and may pop open during coiling or uncoiling. Wear heavy-duty leather gloves and eye/body protection, and exercise extreme caution when handling the blade. Failure to do so could result in serious bodily injury. Refer to your bandsaw owner's manual for further safety instructions.
ProductSiteLaunchDate : 2008-03-06T02:59:07.000-00:00
Style : Compact
UnspscCode : 27112700