Specification Brand : Heschen BulletPoint : Original AEG EP61 B10 BulletPoint1 : Rated Operating Current le (A): 63A; Rated Insulation Voltage UI: 690V BulletPoint2 : Rated Working Voltage Ue: AC220V; Rated Frequency: 50/60Hz BulletPoint3 : Common Circuit: 2P AC 220V; Auxiliary Circuit: 2P AC220V(city power, generator) BulletPoint4 : Conversion Operation Time: <50ms; PC Class BulletPoint5 : Current rating: 63.0 amps CircuitBreakerType : Standard CircuitType : 1-way Color : One Color ConnectivityProtocol : X-10 ConnectorType : Plug In CurrentRating : 63 amps ExternallyAssignedProductIdentifier : 5411815225239 ExternallyAssignedProductIdentifier1 : 850060724039 ExternallyAssignedProductIdentifier2 : 0850060724039 GpsrSafetyAttestation : 1 IncludedComponents : HSG2R-63 2P InternationalProtectionRating : IP57 ItemName : Heschen ATS Dual Power Automatic Transfer Switch, HSG2R-63, 2P, 63A 220VAC, PC Class, Power Supply Controller Uninterrupted Transfer Switch, 35mm DIN Rail Mounting ItemPackageDimensions_Height : 5.5 centimeters ItemPackageDimensions_Length : 12.3 centimeters ItemPackageDimensions_Width : 8.5 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : industrial-basic-switches LightType : LED LowerTemperatureRating : -40 degrees_celsius Manufacturer : Heschen Material : Plastic Material1 : Nylon Material2 : Polycarbonate ModelNumber : HSG2R-63 2P MountingType : DIN Rail Mount NumberOfItems : 1 NumberOfPoles : 2 NumberOfPositions : 2 OperatingVoltage : 12 volts OperationMode : ON-OFF PackageLevel : unit PartNumber : HSG2R-63 2P ProductDescription : Work requirements:
The temperature range of the working environment is -5°C-+40°C, and the average temperature within 24 hours should be lower than +35°C.
The temperature range of the storage environment is -25°C-+55°C, and it can reach +70°C in a short period of time (within 24 hours).
The altitude of the installation site should be lower than 2000 meters.
When the ambient air temperature is +40°C. The higher the relative humidity, the lower the temperature. Appropriate measures should be taken to prevent condensation caused by temperature changes.