Cart 2 india

Specification
Brand : ISDT
BulletPoint1 : 【Support daul mode input: DC 240W/USB-C 140W】 The ISDT 608PD lipo battery charger is new generation of pocket chargers. It supports DC 240W high power, max.10A charging current and USB-C (PD3.1)140W input, max. 5A current, which can be 2~6S lithium/life/ liion/ lipo/lihv/1~16s ni-mh/cd battery charger. Committed to being the best lipo charger for your RC car, plane, drone, spektrum or traxxs batteries.
BulletPoint10 : What You Get: 1x Display Charger,1 x USB-C to USB-C Charging Cable,1 x USB-A to USB-C Charging Cable(Note: Batteries / USB output cable not included)
BulletPoint2 : 【RC battery charger with power mode! 】ISDT 608PD is equipped with a bidirectional USB-C port, which not only supports 140W input, but also supports 100W output. When the RC battery is used as a power source, it can charge our mobile phones, laptops and MacBooks with a max. output power of 100W. Yes, it is not only a 6s 240W lipo charger, but also a 100W USB C PD charger! The design allows energy to be diverted to save energy. (Power adapter and cable not included!!!)
BulletPoint3 : 【More worry and time saving】The new generation 608PD supports preset 5 battery types and battery parameters. One-click charging simplifies the operation steps for us. Charging operation is faster!
BulletPoint4 : 【IPS Screen:Low power consumption】 The lipo balance charger with a 1.5” IPS screen, auto-brightness adjustable, 178°visible angle，display clear and distinct even in varies hard environment or angles as well as in strong sunshine, reduce light damage to user’s eyes.
BulletPoint5 : 【Support "ISDLink" APP Remote Control 】In APP, you can perform an OTA upgrade of your lipo charger, preset charging tasks, monitor the charging process at any time. Wirelessly operate, awesomely simple. Besides, you also can upgrade the charger on PC by USB port.
BulletPoint6 : 【ISDT 6S charger with cooling fan】Advanced crafty cooling air duct ，Active cross-flow cooling air duct design, initiative ball bearing cooling fan, with accurate designed aluminum alloy fins and Hi-Tech silicon heat conduct pad, built up a High efficiency heat dissipation system.
BulletPoint7 : Charging Rules: [INPUT≥PD65w] Three batteries are charged in parallel[Charging current:2.5A(MAX) x 3]; [PD65W＞Input≥PD45W] Two batteries with high power level are charged at the same time[Charging current:3.5A(MAX) x 2]; [INPUT≤PD45W] Charge one by one[Charging current:3.5A(MAX) x 1].The battery with higher power level will be charged first
BulletPoint8 : Using Mini 3/4 Pro Battery as Power Bank/discharge battery: You can use DJI Mini 3/4 Pro battery to charge remote controller or other USB devices.NOTE:USB charging cable not included
BulletPoint9 : Input: 5V/9V/12V/15V/20V --3A. Output: 8.5/8.6V--2.5A(MAX) x3, Dual Output: 8.5/8.6V--3.5A (MAX) x2; USB Output:5V/2.0A(MAX)
Color : Black
CompatibleDevices : RC Vehicle Batteries
ConnectorGender : Male-to-Male
ConnectorType : 4mm Bullet, Jst-xh
CurrentRating : 10 amps
CustomerPackageType : None/No special packaging
ExternallyAssignedProductIdentifier1 : 764784708872
ExternallyAssignedProductIdentifier2 : 0764784708872
GpsrSafetyAttestation : 1
IncludedComponents : USB Cable
IndoorOutdoorUsage : indoor
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
InputVoltage : 240 volts
ItemDisplayDimensions_Length : 9.4 inches
ItemName : ISDT 608PD Lipo Battery Charger DC 6S/240W/10A USB C 100W/5A Smart Charger for RC Batteries Balance Charger for Life/Lilon/LiPo/LiHV (1-6S),NiMH(1-16S),Pb (1-12S) Batteries
ItemPackageDimensions_Height : 9.1948 centimeters
ItemPackageDimensions_Length : 3.2004 centimeters
ItemPackageDimensions_Width : 6.2992 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : hobby-rc-vehicle-battery-chargers
Manufacturer : ISDT
ManufacturerMinimumAge : 144
Material : Silicone
MaximumCurrent : 37 amps
ModelName : 260-15-104
ModelNumber : 608PD
NumberOfCompartments : 7
NumberOfItems : 1
NumberOfPins : 6
OutputVoltage : 30 volts_of_direct_current
PartNumber : 608PD
Pattern : Solid
ProductDescription :

Note: When 608PD uses PD input, if the computer is used as the power supply, the machine switch key will be locked due to insufficient power, but the app can operate the switch. Therefore, it is recommended to connect a power supply that supports PD output power.

(The power adapter and cable are not included!!!)

Parameter :

Maximum Input Current: DC 10A,USB-C 5A

Input voltage range: DC 5-30V, USB-C 5-28V

Output Voltage Range: DC 3.0~30V

Charging Current: 0.5~10.0A

Maximum charging power: 240W/10A,140W/5A

Maximum Discharge Power: USB-C 100W/5A

Support battery type and series: LiFe,LiPo,LiHv(4.35V~4.50V)1-6S/Pb 1-12S/NiMH 1-16S

Balance Current: 0.8A/Cell Max

Operating Temperature: 0~40℃ Storage Temperature: -20~60

Abnormal battery voltage alarm: Support

Alarm for string number setting error: Support

Dimension: 72.5×60×26.6mm

Weight: 85g(±10%)

Package include:

1x ISDT 608PD Lipo Charger (puls a screen protector)

ProductSiteLaunchDate : 2023-11-03T10:33:00.234Z
RecommendedUsesForProduct : Charging and balancing batteries for hobby RC vehicles
Size : YS-XT60-LP
SpecificationMet1 : CE
SpecificationMet2 : FCC
StreetDate : 2019-12-01T00:00:01Z
Style : Travel Bag
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword : unisex-children
TargetGender : unisex
UnitCount : 1
UnspscCode : 26111704
Voltage : 30 volts_of_direct_current
WarrantyDescription : 1 Year
Wattage : 407 watts