Cart 2 india

Specification
Amperage : 2 amps
Brand : Victron Energy
BulletPoint1 : BLUETOOTH SMART – The Blue Smart IP67 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
BulletPoint2 : BATTERY CHARGED SMARTLY – The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains it’s health, ensures better performance… and a longer life.
BulletPoint3 : RECOVERY OF DEEPLY-DISCHARGED ‘DEAD’ BATTERIES – Unlike other brands, the Blue Smart IP67 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
BulletPoint4 : COMPLETELY ENCAPSULATED – Waterproof, shockproof and ignition protected.
BulletPoint5 : 5 YEAR WARRANTY – The Professional’s Choice
BulletPoint6 : ✔【Special instructions for the 60A charger】: first plug the charger into the power supply-----look at the voltage---adjust the voltage-----then connect the load-----and then adjust the current. Step1: Do not connect the battery to the charger, turn on the power first, adjust the voltage knob to adjust the voltage, refer to the voltage display at the top of the display, (4S lifepo4 battery 3.65 v*4=14.6V, 3S lithium battery 4.2v *3=12.6V) , adjust to the voltage you need.
BulletPoint7 : ✔【Step2】: Adjust the current to the minimum. After connecting the battery, adjust the current from small to large to the current you need. (It is not allowed to adjust the voltage knob again during the charging process, otherwise there will be overcharge or undercharge, which may burn the host at your own risk.) If the current on the display becomes zero, it means it is fully charged.
BulletPoint8 : ✔【Charging】: During the charging process, the voltage of the display screen will drop, which is a normal phenomenon. Do not adjust the voltage of the charger while charging. In order to charge the battery with constant voltage, it is normal for the voltage of the charger itself to fluctuate. Adjust the voltage and current for the first time. No further adjustment is required later. If you do not understand, please consult customer service! Video connection: https://youtu.be/I0G-c5XRzAI
BulletPoint9 : ✔【Note】：To extend the life of the charger. The charger has a voltage of 220V, and the maximum recommended current is 90%, for example, 60A. It is most suitable to adjust it to about 54A. The maximum recommended voltage and current of 110V is 80%, and the maximum recommended voltage and current of 100V is 70%.
Color : Blue
Color1 : Multicolor
Color2 : Grey
CompatibleDevices : [EX] Cellular Phones
ConnectivityTechnology : DC
ConnectorType : Proprietary
CurrentRating : 12 amps
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 6919305340800
ExternallyAssignedProductIdentifier1 : 8719076044871
ExternallyAssignedProductIdentifier2 : 08719076044871
ExternallyAssignedProductIdentifier3 : 00814632014737
FrequencyRange : 60 hertz
IncludedComponents : Power Adapter, 12mm Conversion Plug
InputVoltage : 120 volts_of_alternating_current
ItemDisplayDimensions_Length : 9.25 inches
ItemDisplayDimensions_Width : 7.3 inches
ItemName : Victron Energy Blue Smart IP67 24-Volt 12 amp 120VAC Battery Charger (Bluetooth)
ItemPackageDimensions_Height : 25.4 centimeters
ItemPackageDimensions_Length : 8.4 centimeters
ItemPackageDimensions_Width : 18.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-battery-chargers
Manufacturer : Victron Energy
Material : ABS
ModelName : C60A
ModelNumber : BPC241215106
MountingType : Wall Mount
NumberOfItems : 1
NumberOfPowerLevels : 1
OutputCurrent : 2 amps
OutputVoltage : 24 volts
PackageLevel : unit
PartNumber : BPC241215106
PowerPlugType : type_b_3pin_na
PowerSourceType : Corded Electric
ProductDescription : BlueSmart IP67 Charger - 12 VDC - 12AMPFeatures:Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminum and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk absorption recondition float storage The Blue Smart Charger features a microprocessor controlled adaptive battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to equalize the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
ProductSiteLaunchDate : 2019-06-27T07:00:00.000Z
Size : 24V/12A
SkipOffer : 1
SpecificationMet : UL, FCC
StreetDate : 2023-02-01T00:00:01Z
Style : 24V/12A 120VAC
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TotalUsb20Ports : 3
TotalUsbPorts : 3
UnitCount : 1
UnspscCode : 26111704
Voltage : 12 volts
WarrantyDescription : 2 year manufacture
Wattage : 135 watts