Specification Brand : Zunate BulletPoint1 : Auxiliary Board: The equalization board is only an auxiliary of the board, without overvoltage and overdischarge functions.Any bad battery test can be used. Voltage can only be achieved when used in parallel with the board BulletPoint2 : Applicable Battery: NCM(Li ion) LFP, general ternary iron lithium battery, LTO battery is not supported. Single voltage working range 3.0V to 4.5V; recommended battery capacity below 30AH BulletPoint3 : Equalization Method: Is detected that the voltage difference between adjacent batteries is greater than 0.1V to the equalization start, and the voltage difference is less than 0.03V to stop working. (It takes multiple charging and discharging to achieve a better balanced effect.) BulletPoint4 : Voltage and Current: 30mV (typical value) voltage balance accuracy between adjacent voltages, 0.1V voltage difference 0.5A balance current, when the voltage difference is 0.2V, the maximum balance current is 1.2A. 0.01mA quiescent current, enter sleep state when the adjacent voltage difference is less than 0.03V BulletPoint5 : Pay Attention: Compatibility with low strings is not recommended, the indicator light will flash and report an error. Check that each battery is properly wired and insulated before connecting. Otherwise it will short circuit and burn the board Color : default CurrentRating : 2 amps ExternallyAssignedProductIdentifier1 : 0665415527056 ExternallyAssignedProductIdentifier2 : 665415527056 InputVoltage : 240 volts ItemName : Zunate 4S 3.0V to 4.5V Battery Active Balancer, Active Equalizer for Balanced Energy, Compatible for NCM(li Ion) LFP, General Ternary Iron Lithium Battery ItemPackageDimensions_Height : 11.2 centimeters ItemPackageDimensions_Length : 1.2 centimeters ItemPackageDimensions_Width : 7.2 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : general-use-battery-chargers Manufacturer : Zunate ModelNumber : PDVMC NumberOfItems : 1 PartNumber : Zunaten7pzg8eb1s7409 ProductDescription : Feature: 1. Auxiliary Board: The equalization board is only an auxiliary of the board, without overvoltage and overdischarge functions.Any bad battery test can be used. Voltage can only be achieved when used in parallel with the board 2. Applicable Battery: NCM(Li ion) LFP, general ternary iron lithium battery, LTO battery is not supported. Single voltage working range 3.0V to 4.5V; recommended battery capacity below 30AH 3. Equalization Method: Is detected that the voltage difference between adjacent batteries is greater than 0.1V to the equalization start, and the voltage difference is less than 0.03V to stop working. (It takes multiple charging and discharging to achieve a better balanced effect.) 4. Voltage and Current: 30mV (typical value) voltage balance accuracy between adjacent voltages, 0.1V voltage difference 0.5A balance current, when the voltage difference is 0.2V, the maximum balance current is 1.2A. 0.01mA quiescent current, enter sleep state when the adjacent voltage difference is less than 0.03V
How to Use: Plug and Play
Specification: Item Type: Battery Active Balancer Material: PCB Operating Voltage: 3.0V to 4.5V Applicable Battery: NCM(li Ion) LFP, General Ternary Iron Lithium Battery
Package List: 1 x Battery Active Balancer 1 x Cable
Note: General Lithium iron ternary battery, not suitable for LTO battery ProductSiteLaunchDate : 2022-07-06T00:00:00.000Z Style : FXLION V Mount Charger and V Mount Battery NANO TWO SupplierDeclaredDgHzRegulation : not_applicable UnspscCode : 26111700 WarrantyDescription : 1 Year Limited Warranty