Cart 2 india

Specification
Brand : JUTA
BulletPoint1 : BTP600 perfectly works with different types of lead acid battery, including flooded, AGM, gel, deep-cycle batteries and so on. It analyzes the battery swiftly and compressively on its health status, charge level, internal resistance and lifespan.
BulletPoint2 : Bad battery detection. Able to test the battery when power is low, so you don’t need to fully charge the battery before testing. Checks failures of starting/charging systems of cars. Performs battery test and load test about battery’s healthy status and capacity.
BulletPoint3 : Rating systems available – CCA, JIS, DIN, IEC, EN, SAE, GB
BulletPoint4 : A built-in printer that uses 2 1/4” (2.25” W x 1.18” L) thermal paper and requires no ink. Note: To use the printer, please turn on the engine first.
BulletPoint5 : Polarity reverse connection protection. A color LCD screen indicates battery information. The outer shell made of acid-resident ABS is built to last. It helps you diagnose and resolve battery’s health problems timely without disconnecting it or using a separate one.
Color : Black
Color1 : Black
Color2 : Red
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8431269294114
ExternallyAssignedProductIdentifier1 : 787997590386
ExternallyAssignedProductIdentifier2 : 0787997590386
GradeRating : Industrial
IncludedComponents : 1
ItemForm : Sheet
ItemName : JUTA BTP600 Car Battery Load Tester Bad Cell Analyzer Auto 12V/24V 20-3000 CCA 240Ah Cranking Charging Test Tool for Automotive Motorcycle Heavy Duty Trucks
ItemPackageDimensions_Height : 24.5 centimeters
ItemPackageDimensions_Length : 6.8 centimeters
ItemPackageDimensions_Width : 15.6 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : auto-battery-testers
Manufacturer : JUTA
Material : Copper 110
MaximumOperatingVoltage : 75 volts_of_direct_current
MeasurementAccuracy : 0.2
MeasurementType : Ammeter
MinimumOperatingVoltage : 6 volts_of_direct_current
ModelNumber : BTP600
NumberOfItems : 1
PartNumber : BTP600
PowerSourceType : Battery Powered
ProductDescription : Battery load tester with printer
BTP600 is a great gadget to test all automotive lead acid batteries, including flooded, AGM, deep-cycle and gel batteries, also the 12V/24V charging and cranking systems. This fabulous battery tester can give you a quick yet comprehensive inspection on battery’s health, status of charge, internal resistance, lifespan and the charging capacity of your alternator.
Battery test
To analyze the battery healthy status and calculate the actual cold cranking capability of the battery and the its lifespan. By doing this test, you are able to determine whether you should give your car a jump or replace the battery.
Cranking test:
To test the starter motor. By testing the actual required cranking current and cranking voltage of the starting motor, you can find out if the starter motor still works properly.
Charging test:
To check the charging system which includes generator, rectifier, rectifier diode, etc., to find out if the output voltage of the generator and the charging current are normal and the rectifier diode operating properly.
Load test:
To test the battery’s load system and measure the amperes produced by the battery. It lets you know if the amperes are high enough to turn on the engine.
Specifications
Cold cranking amps (CCA) measurement range:
IEC (International): 20~2500
CCA (USA): 20~3000
EN (Europe): 20~3000
DIN (Germany): 20~2500
JIS (Japan): 26A17~N200Z
Voltage measurement range: 6V~32V DC
Current measurement range: 4AH~240AH
Working temperature: -20°C~50°C
Outer Shell: Acid-resistant ABS

ProductSiteLaunchDate : 2020-04-21T02:13:50.035Z
Size : Thickness 0.3mm Width 15mm Length 5 meter
Style : Heavy
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41113600
UpperTemperatureRating : 50 degrees_celsius