Cart 2 india

Specification
Brand : ERoomQ
BulletPoint1 : The products are distributed with voltmeters, ammeters, tuning knobs, power switches and point switches.
BulletPoint2 : When the power switch is turned on, the voltmeter indication should be around 6 volts. If the voltage is low, the discharge distance will be shortened accordingly. Rotate the tuning knob to tune the pressure between the two discharge balls as needed.
BulletPoint3 : The function of the point switch is to make the electric motor produce instantaneous discharge, such as used in the gas explosion experiment; when the power switch is turned on, the electric motor can discharge for a long time.
BulletPoint4 : The motor is connected to a 6V/0.5A stabilized power supply.
BulletPoint5 : Operation method: Open the discharge bracket cover, a folded discharge bracket, and adjust the discharge rod upright. Adjust the distance between the two discharges to about 30mm. Turn on the power switch of the electric motor. Just as the two discharge balls are in a stable discharge state, the electric discharge is proved. When the motor is running normally, turn off the power supply and short-circuit the two discharge balls, discharge the residual charge on the discharge rod, and prepare for
BulletPoint6 : Excellent Chemical resistance / thermal shock resistance
Capacity : 2000 milliliters
Color : as described
ExternallyAssignedProductIdentifier : 7591334107709
IncludedComponents : 1 Pc of Beaker 2000mL
ItemName : ERoomQ Physical electrostatic Experiment Equipment Teaching Equipment Electronic Electrizer
ItemPackageDimensions_Height : 9.25 inches
ItemPackageDimensions_Length : 11.81 inches
ItemPackageDimensions_Width : 6.29 inches
ItemTypeKeyword : beakers
Manufacturer : ERoomQ
Material : Borosilicate Glass
MetalType : other
NumberOfItems : 1
PartNumber : 22WUKLIUasj3950
ProductDescription : Product Name: Electronic Lifting Motor
Product size: 20*10.5cm
Product weight: 1.5kg
Precautions:
1. The product is a high-voltage static electricity generating device. When the power is turned on, all exposed metal parts on the discharge rod are charged with high-voltage static electricity. Be careful not to get close or touch your hands or body to avoid electric shock, especially to avoid two hands approaching at the same time. Two electrodes, this will cause a heavy electric shock. If you need to connect high voltage to the experimental device during the experiment, you should turn off the power supply and disconnect the remaining power before connecting to avoid electric shock. After the experiment, turn off the power supply, short-circuit the two discharge balls, discharge the remaining electricity, return the bracket to its position, and cover the protective cover.
2 Please do not open the box to avoid damage to high-voltage components.
3. When experimenting, please pay attention to safety and carry out the experiment according to the steps.


ProductSiteLaunchDate : 2024-05-13T11:23:24.863Z
Size : Pack of 2
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1