Cart 2 india

Specification
AgeRangeDescription : adult
Brand : DNGXAOYA
BulletPoint1 : 10T/22000LB BEARING PULLER: The 3-jaw hydraulic gear puller kit features a 10T/22000LB maximum capacity, 2 inches (50 mm) of shaft travel, 9.8 inches (250 mm) of maximum spread and 6.3 inches (160 mm) of maximum extension, making it the ideal tool for your pulling job.
BulletPoint2 : TWO WAY OPERATION: This gear puller can be operated horizontally and vertically, which is convenient for machine parts to be operated in different directions. The included extended handle ensures more flexible and labor-saving operation.
BulletPoint3 : THOUGHTFUL DESIGN: 3 jaws can be adjusted from high to low and the pump head can be rotated 360 degrees for flexibility; the bi-directional yoke allows for easy interchangeability of 2 or 3 leg pullers; turn the oil return switch and pull up on the handle to pressurize or relieve pressure.
BulletPoint4 : THICKENED CYLINDER: The hydraulic pump is made of high strength carbon steel, the pump body is molded in one piece, the whole seamless and smooth, no oil leakage, no breakage. The one-piece casting cylinder works durably without oil leakage, ensuring long-lasting use.
BulletPoint5 : HIGH STRENGTH JAW HOOK: Alloy steel forged jaws are strong and wear-resistant, no deformation. The finely machined jaws have stronger gripping force and the workpiece is not easy to slip and fall off.
Color : One Color
ExternallyAssignedProductIdentifier : 7351542516829
ItemName : DNGXAOYA Hydraulic Cylinder Repair Tools，Hydraulic Gear Puller 10T/22000LB, Bearing Puller 2-jaw Or 3-jaw, for Sprockets, Rotors, Axles, Wheel Bearings，3 Jaw Puller(50T/110000LB)
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 50 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-bearing-pullers
Manufacturer : SHENGHE
ModelName : SHENGHE
ModelNumber : SHENGHE
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : SHENGHE
ProductDescription : Bearing puller, light weight, small size, more convenient to carry.
Alloy steel high temperature forging jaws, no deformation, no breakage.
2 claws and 3 claws switch at will, flexible use, to deal with different use scenarios.
Vertical and horizontal can be used, convenient to operate machine parts in different directions.
Hardened and forged thimble, sturdy and wear-resistant, non-slip handle, effectively preventing the operation is slipping.
Suitable for pulling hubs, flanges, gears, bearings, etc.

Hydraulic Gear Puller
Load capacity: 10T/22000LB
Horizontal pulling distance: 9.8 inches (250 mm)
Vertical Pull Distance: 6.3in (160mm)
Shaft travel: 2 inches (50 mm)
Weight: 10.5kg/23.1lb
Jaws: replaceable 2 jaws or 3 jaws.
Size: 40*16*16cm/15.7*6.3*6.3in.

Note: Due to the shooting angle and light problem, the product color will have reasonable color difference.
The size is measured manually, there will be errors, please refer to the actual size.

If you have any questions about this product, please feel free to contact us. We will reply within 24 hours, we are committed to customer satisfaction.
ProductSiteLaunchDate : 2025-01-08T06:50:50.944Z
Size : 50T/110000LB
UnitCount : 1
UnspscCode : 52140000