Cart 2 india

Specification
AgeRangeDescription : adult
Brand : DNGXAOYA
BulletPoint1 : COMPATIBLE: The 30T/66000LB Hydraulic Gear Puller can be operated horizontally or vertically without site restrictions. It has a shaft stroke of 2in/5cm, a maximum stroke of 7.8in/20cm and a maximum spread of 15.7in/40cm.
BulletPoint2 : EASY TO OPERATE: Two claws or three claws can be installed and the height can be adjusted as needed. Horizontal and vertical direction can be used. The alloy steel jaws can be firmly fixed in the position to be processed and are not easy to slide. The pump head of the hydraulic bearing puller can be rotated 360 degrees, which is convenient for you to operate the tool.
BulletPoint3 : HIGH-TEMPERATURE HARDENED AND FORGED EJECTOR PIN: The ejector pin is high-temperature hardened and forged, sturdy and wear-resistant, and can provide a maximum stroke of 2in/5cm, which brings it closer to the target object, realizing shorter stroke and more efficient pulling process.
BulletPoint4 : LONG LASTING USE: The bearing puller is made of heavy-duty forged steel, with a one-time molding process for the pump body and overall seamless modeling, so that there will be no cracking of the cylinder and oil leakage even after a long time of use. Stable performance, durable.
BulletPoint5 : MULTI-SITUATION USE: The hydraulic gear puller kit can remove flanges, hubs, pulleys, gears, flywheels, bearings and other round workpieces in a variety of mechanical equipment. Widely used in automotive repair shops, repair shops, machinery factories, railroad vehicle overhaul, mine overhaul, machinery installation, construction project support, etc.
Color : One Color
ExternallyAssignedProductIdentifier : 7351542517192
ItemName : DNGXAOYA Hydraulic Gear Puller Kit, 2 Jaw or 3 Jaw Bearing Separator, 30T/66000LB Hydraulic Capacity Puller, Horizontal or Vertical Brake Drum Puller, for Pulling Hubs, Gears, Flanges(5T/11000LB)
ItemPackageDimensions_Height : 30 centimeters
ItemPackageDimensions_Length : 50 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-bearing-pullers
Manufacturer : SHENGHE
ModelName : SHENGHE
ModelNumber : SHENGHE
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : SHENGHE
ProductDescription : Bearing puller, light weight, small size, more convenient to carry.
Alloy steel high temperature forging jaws, no deformation, no breakage.
2 claws and 3 claws can be switched at will, flexible use, to cope with different use scenarios.
Vertical and horizontal can be used, convenient to operate machine parts in different directions.
Hardened and forged thimble, sturdy and wear-resistant, non-slip handle, effectively preventing the operation is slipping.
Suitable for pulling hubs, flanges, gears, bearings, etc.

Hydraulic Gear Puller
Load capacity: 30T/66000LB
Horizontal pulling distance: 15.7in/40cm
Vertical pulling distance: 7.8in/20cm
Shaft stroke: 5cm/2in
Weight: 25kg/55.1lb
Jaws: replaceable 2-jaw or 3-jaw.
Size: 40*16*16cm/15.7*6.3*6.3in.

Note: Due to the shooting angle and light problem, the product color will have reasonable color difference.
The size is measured manually, there will be errors, please refer to the actual size.

Please feel free to contact us if you don't understand or have any questions about this product. We are committed to customer satisfaction.
ProductSiteLaunchDate : 2025-01-08T06:50:38.088Z
Size : 5T/11000LB
UnitCount : 1
UnspscCode : 52000000