Cart 2 india

Specification
Brand : OriGlam
BulletPoint1 : Adjustable 2 Jaws - Two jaw with adjustable clamping depth, fit for different size gears and bearings. Adjustable clamping depth between two jaws, suitable for different sizes of gear or bearing. It is very easy to install and use, saving time.
BulletPoint2 : High Carbon Steel - These two claws gear puller, which is made of carbon steel, the point of the mandrill through a special heat treatment process, more solid and durable.
BulletPoint3 : Useful Design - Adjust screw design, flexible and convenient to repair different size gears and bearings. Into Tight Areas bearing gear remover can remove gears, pulleys, and flywheels off a shaft in hard-to-reach spots without damaging your application.
BulletPoint4 : Easy to Install - Use the two jaws to catch the bearing; Rotate the mandrel with the thread; Slowly pull out the bearing of the shaft. The puller can be rotation, enable stretching size and working space. It is very easy to install and use, saving time.
BulletPoint5 : Widely Used - Two jaw puller can easily disassemble bearings, gears and rotors. These two jaw gear pullers are suitable and ideal for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing generator bearing, machine bearing and so on.
FitType : Universal
IncludedComponents : Bearing Puller
ItemName : OriGlam Two Jaw Bearing Puller, Adjustable 2 Jaws Gear Remover Tool, Puller Kit for Bearing, Gears, Pulley, Flywheel, Motorcycle, Car (3 inch)
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-bearing-pullers
Manufacturer : OriGlam
Material : High Carbon Steel
ModelName : Two Jaw Bearing Puller
ModelNumber : HAD_B1
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : HAD_B1
ProductDescription :
Features:


Size: (3 inch)
Material: High Carbon Steel
Surface Treatment: Heat treatment
Number of Claws: Two-claw
Type: Claw Puller

Product Name: High Carbon Steel Pump Removing Kit
Features:
Made of high carbon steel, the point of the mandrill through a special heat treatment process, more solid and serviceable.
Adjustable design, two jaw with adjustable clamping depth, fit for different size gears and bearings.
Comes with hexagonal screw and thread for fastening, high strength.
Easy Performance. Use the two jaws to catch the bearing, rotate the mandrel with the thread, slowly pull out the bearing of the shaft.
Widely use in various bearings that are not easy to disassemble. Suitable for automotive flywheel, motorcycle wheel, car wheel, scooter motorcycle bearing and gear and so on.

Pull Size: 38 x 65mm
Open Width Range: 17 - 53.5mm
Open Maximum Depth: 65mm

For your used safety, the applicable width is not too wide. If a wider width is required, it is recommended to purchase a larger size puller.

Product Weight : 345 G / 12.17 Ounces
Product Dimensions (L*W*H) : 10.6*6.9*3.0 CM / 4.17*2.72*1.18 Inches
Package Weight : 351.0 G / 12.38 Ounces
Package Dimensions (L*W*H) : 10.8*7.0*3.4 CM / 4.25*2.76*1.34 Inches

Package Include:
1 x Two Claw Puller (3 inch)
Size : 3 inch
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 25170000
WarrantyDescription : 2