Cart 2 india

Specification
Brand : YUNRUS
BulletPoint1 : Voltage: 110V, 0.1A,Power: 65W,Rotating speed: 4200r/min.
BulletPoint2 : Working table size: 165x165 mm,Machine size: 195x195x160 mm.
BulletPoint3 : Suitable for grinding glass,ceramics and other hard and brittle material.
BulletPoint4 : Inside the rotary shaft (the fine shaft of the grinding head) diameter: 0.7cm, Grinding wheel inner diameter: 0.79cm.
BulletPoint5 : Grinding variety of geometric shapes: plane, curve, rounded corners, slope, etc.
Color : Gray
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0796862516161
ExternallyAssignedProductIdentifier2 : 796862516161
ExternallyAssignedProductIdentifier3 : 00690550001284
FinishType : Finish
GpsrSafetyAttestation : 1
Horsepower : 65 watts
IncludedComponents : inc
ItemName : 110V 65W Portable Mini Stained Grinder Diamond Glass Art Grinding Tools With MCBL58 Grinding Wheel DIY US Shipment
ItemPackageDimensions_Height : 26.2 centimeters
ItemPackageDimensions_Length : 26.1 centimeters
ItemPackageDimensions_Width : 26.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-bench-grinders
Manufacturer : YUNRUS
Material : Metal
MaximumRotationalSpeed : 4200 rpm
ModelNumber : T24463
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : T24463
PowerSourceType : electric
ProductDescription :

Grinding wheel installation: 

1. Before installation of grinding wheel, topped with lubricant, engine shaft grinding wheels need 

to apply a layer of lubricant inside. 

2. The grinding wheel mounted to the engine shaft, the fixed screw position higher than the engine shaft. 

The position of the grinding wheel on the axle must be at least 1/8" diamond part above the operating table.

3. Fixed grinding wheel on the shaft with hexagonal wrench clockwisely. 

Installation Note: Maintain stability of the grinding wheel installed in the engine shaft of the plane. 

Operationg Note: 

1. Can not grinding without water. Ensure the grinding wheel is wet 

2. When using the grinding wheel, with small strength , don't use too much strength.Too much

strength will reduce grinding machine and the service life of the grinding wheel. 

3. After usement, clean the water reservoir. Remove the reservoir, clean up the rest of the residue

after grinding. 

4. In order to prolong the service life of grinding machine, cleaning and add lubricant to the engine shaft, 

25 hours after each use, remove all the grinding wheel and the fixed screw. 

5. If the grinding wheel not be used for a week or longer,it need to grind down on stage to prevent the direct axis stick on. 

This will help you to develop check engine shaft and wheel maintains a habit. 

6. Don't grinding metal. If grinding metal, it will damage the grinding wheel and result in can not grinding glass any more.  

Package included: 

1 x Glass Grinder 

1 x 5/8” diamond grinder bit(MCBL58Grinding Wheel)

ProductSiteLaunchDate : 2019-07-11T07:00:00.000Z
Size : (Pack of 2)
Style : Portable,Curve
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112700
Voltage : 110 volts
Wattage : 65 watts