Cart 2 india

Specification
Brand : Rockford Systems, LLC
BulletPoint1 : Easily check tongue and work rest openings
BulletPoint2 : Safety yellow with silk-screened text and graphics
BulletPoint3 : Small size yet durable
BulletPoint4 : Check OSHA 29 CFR 1910.215 specifications
BulletPoint5 : For bench and other grinders
Color : Yellow
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 7392485006183
ExternallyAssignedProductIdentifier2 : 07392485006183
ExternallyAssignedProductIdentifier3 : 00690550001284
FinishType : Finish
GpsrSafetyAttestation : 1
Horsepower : 65 watts
IncludedComponents : OWC-1
ItemName : Bench Grinder Safety Gauge (1)
ItemPackageDimensions_Height : 3.048 centimeters
ItemPackageDimensions_Length : 21.336 centimeters
ItemPackageDimensions_Width : 12.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-bench-grinders
Manufacturer : Rockford Systems, LLC
Material : Aluminum
MaximumRotationalSpeed : 4200 rpm
ModelName : OWC-1
ModelNumber : b666ef6c-dd7b-4ffe-8983-f4c578c0618a
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : KSC096-1
PowerSourceType : Manual Powered
ProductDescription :

Grinding wheel installation: 

1. Before installation of grinding wheel, topped with lubricant, engine shaft grinding wheels need 

to apply a layer of lubricant inside. 

2. The grinding wheel mounted to the engine shaft, the fixed screw position higher than the engine shaft. 

The position of the grinding wheel on the axle must be at least 1/8" diamond part above the operating table.

3. Fixed grinding wheel on the shaft with hexagonal wrench clockwisely. 

Installation Note: Maintain stability of the grinding wheel installed in the engine shaft of the plane. 

Operationg Note: 

1. Can not grinding without water. Ensure the grinding wheel is wet 

2. When using the grinding wheel, with small strength , don't use too much strength.Too much

strength will reduce grinding machine and the service life of the grinding wheel. 

3. After usement, clean the water reservoir. Remove the reservoir, clean up the rest of the residue

after grinding. 

4. In order to prolong the service life of grinding machine, cleaning and add lubricant to the engine shaft, 

25 hours after each use, remove all the grinding wheel and the fixed screw. 

5. If the grinding wheel not be used for a week or longer,it need to grind down on stage to prevent the direct axis stick on. 

This will help you to develop check engine shaft and wheel maintains a habit. 

6. Don't grinding metal. If grinding metal, it will damage the grinding wheel and result in can not grinding glass any more.  

Package included: 

1 x Glass Grinder 

1 x 5/8” diamond grinder bit(MCBL58Grinding Wheel)

ProductSiteLaunchDate : 2015-04-06T04:00:00.000Z
Size : Small
Style : Durable
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111900
Voltage : 110 volts
Wattage : 65 watts