Cart 2 india

Specification
Brand : Oregon
BulletPoint : Sold on Amazon
BulletPoint1 : Ceramic Edge Grinder is suitable for grinding glass, ceramics and other hard and brittle materials.
BulletPoint2 : There are two models of grinding wheels for ceramic edge grinder, MCBL1 and MCBL58, we will give one MCBL58 grinding wheel for free.
BulletPoint3 : The grinder comes with a new switch design to avoid electronic conduction, stable and reliable performance.
BulletPoint4 : Ceramic Edge Grinder's rotary shaft (thin shaft of the grinding head) inner diameter: 0.7 cm, grinding wheel inner diameter: 0.79 cm. Small size and easy to carry. Some sizes (5/8" 1") can be automatically filled with water .
BulletPoint5 : The edge grinder can be used for grinding hard and brittle materials such as glass, ceramics, etc. It can grind all kinds of geometrical shapes: flat surfaces, curved surfaces, rounded corners, slopes, etc.
Color : Red
ExternallyAssignedProductIdentifier1 : 036577505273
ExternallyAssignedProductIdentifier2 : 0036577505273
GpsrSafetyAttestation : 1
IncludedComponents : 1 x Glass Grinder 1 x 5/8” diamond grinder bit(MCBL58Grinding Wheel)
ItemDisplayWeight : 1.11 pounds
ItemName : Oregon OEM 537410 [20]Bench Grinder, Scale Kit
ItemPackageDimensions_Height : 12 inches
ItemPackageDimensions_Length : 12 inches
ItemPackageDimensions_Width : 12 inches
ItemPackageQuantity : 1
ItemTypeKeyword : power-bench-grinders
Manufacturer : Oregon Power Products
Material : Metal
MaximumRotationalSpeed : 4200 rpm
ModelName : Stained Glass Grinder
ModelNumber : XL2200RS
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : XL2200RS
PowerSourceType : electric-powered
ProductDescription :

Specifications:

Voltage: 110V, 0.1A

Power: 65W

Rotating speed: 4200r/min

Working table size: 165x165 mm

Machine size: 195x195x160 mm

Machine weight: 2kg

Color: Red

Package included:

1 x Glass Grinder

1 x 5/8” diamond grinder bit(MCBL58Grinding Wheel)

Grinding wheel installation:

1. Before installation of grinding wheel, topped with lubricant, engine shaft grinding wheels need to apply a layer of lubricant inside.

2. The grinding wheel mounted to the engine shaft, the fixed screw position higher than the engine shaft. The position of the grinding wheel on the axle must be at least 1/8" diamond part above the operating table.

3. Fixed grinding wheel on the shaft with hexagonal wrench clockwisely. 

Installation Note: Maintain stability of the grinding wheel installed in the engine shaft of the plane.

Operation Note:

1. Can not grinding without water. Ensure the grinding wheel is wet

2. When using the grinding wheel, with small strength , don't use too much strength.Too much 

strength will reduce grinding machine and the service life of the grinding wheel.

3. After usement, clean the water reservoir. Remove the reservoir, clean up the rest of the residue 

after grinding.

4. In order to prolong the service life of grinding machine, cleaning and add lubricant to the engine shaft, 25 hours after each use, remove all the grinding wheel and the fixed screw.

5. If the grinding wheel not be used for a week or longer,it need to grind down on stage to prevent the direct axis stick on. 

This will help you to develop check engine shaft and wheel maintains a habit.

6.Don't grinding metal. If grinding metal, it will damage the grinding wheel and result in can not grinding glass any more.

7.Bracket not included.

ProductSiteLaunchDate : 2012-05-27T17:38:56.978Z
Style : Angled
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700
Voltage : 110 volts
Wattage : 65 watts