Cart 2 india

Specification
Brand : Generic
BulletPoint1 : Vise Grip Storage Rack Vice Holder Wall Mount 6SP and 11R 304 Stainless Steel
BulletPoint2 : Brushed Stainless Steel Finish
BulletPoint3 : This vice grip rack has 2 slot sizes to accommodate the larger (11R) and smaller (6SP and 6CSP) vice grips.
BulletPoint4 : Slot widths are approximately 0.300" and 0.450".
BulletPoint5 : Only 7.5" wide x 2.5" high of wall space is required to store a large number of vice grips.
BulletPoint6 : Holds approximately 7 larger size vice grips and 9 smaller size vice grip
Color : Silver
ExternallyAssignedProductIdentifier1 : 0741421075139
ExternallyAssignedProductIdentifier2 : 741421075139
IncludedComponents : Self-tapping screws
ItemName : Vise Grip Storage Rack Vice Holder Wall mount 6SP and 11R Made in 304 Stainless steel (304 Stainless steel brushed)
ItemPackageDimensions_Height : 20.2946 centimeters
ItemPackageDimensions_Length : 7.0104 centimeters
ItemPackageDimensions_Width : 15.3924 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : bench-vises
Manufacturer : Vise Grip Storage Rack Vice Holder FA109
Material : 304 Stainless steel brushed
ModelName : Vise Grip Storage Rack Vice Holder
ModelNumber : FA-109-NEW
NumberOfItems : 1
PartNumber : 3FDH8
ProductDescription : Introducing our Pearl Drill Vise, the essential tool for jewelers, artisans, and hobbyists! Adjusts easily to accommodate beads from 3mm to 22mm, ensuring precise drilling from the bottom. Unleash your creativity and elevate your designs with our reliable Pearl Drill Vise!

Before using the pearl drill vise, make sure the pearl is clean and free from any debris or dirt. It's also a good idea to mark the spot where you want to drill the hole using a pencil or a marker. Open the jaws of the pearl drill vise by loosening the screw or adjusting the clamp mechanism. Place the pearl between the jaws of the vise, ensuring that it is centered and held securely in place. Use the adjustable features of the vise to position the pearl exactly where you want to drill the hole. You can adjust the angle and orientation of the pearl to ensure the hole is drilled in the desired location. Once the pearl is properly positioned, tighten the jaws of the vise securely around the pearl. Make sure it is held firmly in place to prevent any movement during the drilling process. Using a small drill bit suitable for drilling pearls, carefully drill into the marked spot on the pearl. Apply gentle pressure and drill slowly to avoid cracking or damaging the pearl. It's important to use a steady hand and to keep the drill bit perpendicular to the surface of the pearl. Once the hole is drilled, remove the pearl from the vise and clean it thoroughly to remove any dust or debris generated during the drilling process. You can use a soft cloth or a mild cleaning solution to gently wipe the surface of the pearl. After drilling the hole, inspect the pearl to ensure that the hole is clean and smooth. If necessary, you can use a fine-grit sandpaper or a jewelry file to smooth out any rough edges around the hole. Whether you're making a necklace, earrings, or bracelet, the drilled pearl can now be used as a beautiful and unique component of your jewelry piece.
ProductDescription1 : Vise Grip Storage Rack Vice Holder Wall Mount 6SP and 11R 304 Stainless Steel
ProductDescription2 : Brushed Stainless Steel Finish
ProductDescription3 : This vice grip rack has 2 slot sizes to accommodate the larger (11R) and smaller (6SP and 6CSP) vice grips.
ProductDescription4 : Slot widths are approximately 0.300" and 0.450".
ProductDescription5 : Only 7.5" wide x 2.5" high of wall space is required to store a large number of vice grips. Holds approximately 7 larger size vice grips and 9 smaller size vice grips
ProductSiteLaunchDate : 2023-06-29T08:00:10.380Z
Size : Pearl Drill Vise - 2-Inch Square
Style : Industrial
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1