Cart 2 india

Specification
Brand : RustyVioum
BulletPoint1 : 【Main technical indicators】Model: LD-3, Maximum speed: 4000r/min, Centrifugal force: 2770 x g, Capacity: 6 Tubes x 50ml, Timing: 0-60min.
BulletPoint2 : 【Variable speed control】Timing control of motor speed, the clear control panel,timing by rotation button, easy to operate, spend less time.
BulletPoint3 : 【Safe and low noise】Dustproof cover can effectively prevent the tubes of centrifugal machine from being dirty, at the same time, it also can decrease noise made by high speed of rotor.
BulletPoint4 : 【Features】LD-3 table centrifuge has beautiful shape, large capacity, small volume and complete functions. Its performance is stable, speed is adjustable and can automatically adjust the balance, low temperature rise, high efficiency and wide applicability.
BulletPoint5 : 【Wide application】Electric centrifuge is a routine laboratory centrifuge. Can be used in various fields such as biology, chemistry, food, education and so on.
ExternallyAssignedProductIdentifier : 8461561774526
IncludedComponents : centrifuge machine
ItemName : RustyVioum Electric Lab Benchtop Centrifuge, 6 Tubes x 50ml 4000rpm Centrifuge Machine with Timer and Speed Control for Lab Lab Medical Practice, Blue
ItemTypeKeyword : science-lab-benchtop-centrifuges
Manufacturer : RustyVioum
ModelNumber : centrifuge machine
NumberOfItems : 1
PartNumber : centrifuge machine
ProductDescription :

The main technical indicators:

1, model: LD-3

2, maximum speed: 4000r/min

3, centrifugal force: 2770xg

4, capacity: 50ml * 6

5, timing: 0-60min special use requirements should be explained

Packing list:

1 x LD-4 table centrifuge

Three, use: 

1, desktop electric centrifuge using three eye safety socket, before use should be the proper grounding work, should be placed in the machine smooth and solid surface. 

2, first check the timer knob, should be in the "0" position, and then connect the power supply, open the power switch, indicator light. 

Four, the specific operation must be according to the following steps: 

A.open the cover carefully, will be placed in the centrifugal protective tube. Note: the symmetry of the centrifugal protective tube sample must be put in the same weight, the weight deviation of not more than 1 grams. 

B. on the cover, adjust the speed to the lowest position. 

C. turn on the power, the timer to spin The time value, a timer from the "0" position, the turntable starts to rotate, from low speed to high speed gradually to the required speed of centrifuge work. 

D. work after a certain period of time, timer back to "0" position, the turntable stops rotating, centrifuge stops working, adjust the speed to the lowest position. Desktop electric centrifuge after use, turn off the switch, the machine will be placed in dry, ventilated place, and keep it clean.

Five, note: 

1, the operation of the desktop electric centrifuge series excitation type motor, the brush is generally about 500 hours or so, should be reversed in time, so as not to brush commutator wear after grinding.

2, centrifuge table electric factory noise standard is lower than 70 dB (1 meters out centrifuge were measured in each group). 

3, Plastic tube weight deviation should be less than 0.2 grams, generally in the tube after damage, should be reversed by a group at the same time exchange or symmetric two roots together exchange method, in order to reduce the deviation phenomenon. 

4, in operation, two symmetrical glass tube (including laboratory liquid) and weight The length should be equal, if the deviation is larger, it will produce shaking. 

5, the disc should avoid meeting strong acid, caustic and corrosion. 

6, table electric centrifuge as a whole product, should often pay attention to maintenance.

ProductSiteLaunchDate : 2024-08-27T08:36:56.467Z
RegulatoryComplianceCertification : RSDOS.0565GA-006
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41000000