Cart 2 india

Specification
Brand : EQCOTWEA
BulletPoint1 : [Industrial-Grade Speed]:Pneumatic-powered 1.5KW motor,the machine can work at up to 3400 r/min,easily coping with a wide range of materials such as solid wood,density board,etc.;equipped with double-head,it is possible to drill two plates or two positions of the same plate simultaneously,which significantly improves the working efficiency
BulletPoint2 : [Precision Alignment]:The machine is equipped with high-precision positioning guide plate,which is able to adjust the drilling position accurately and supports flexible adjustment in both vertical and horizontal directions.The distance between the drill head and the table surface can be controlled by turning the top bolt,it can be flexibly adjusted according to the different materials of the plate
BulletPoint3 : [Easier & Safer to Use]:Adopting foot switch to control the operation,freeing your hands,simple and easy to use,no need for complex training to get started.The control panel is equipped with emergency stop knob and tool calibration knob to ensure the safety and reliability of the operation process and the accuracy of the drill bit position
BulletPoint4 : [All-In-One Accessory Kit]:Standard 45-9.5 drill kit(including φ35 mm x1,φ8 mm x2),the drill material is made of high carbon steel material with high hardness and long service life;the drill bits can be changed at any time
BulletPoint5 : [Parameter]:Voltage:110 V/60HZ;Single Motor Power:1.5 KW(x2);Maximum Depth of Hole:0-1.97"(0-50 mm);Speed:3400 r/min;Air Pressure:0.6-0.8 Mpa;Drill:φ35 mm(x1) + φ3 mm(x2);Combined Drill Model:45-9.5;Scale:66.93"(170 cm)
Color : 0.8x10x1540mm
ExternallyAssignedProductIdentifier1 : 0198462484329
ExternallyAssignedProductIdentifier2 : 198462484329
IncludedComponents : 66.9" long scale(x1);foot switch(x1);scale retaining palte(x2);positioning baffle(x2);set screw(x2);screw(x4);random wrench(x1)
ItemName : EQCOTWEA 110V Pneumatic Hinge Boring Insertion Machine Upward Punching Double-Head Hinge Drilling Machine for Furniture Wood Boards with 45-9.5 Drill Kit 0-50mm Depth Adjustable 1.5KW
ItemPackageDimensions_Height : 64.17 inches
ItemPackageDimensions_Length : 70.08 inches
ItemPackageDimensions_Width : 38.19 inches
ItemTypeKeyword : power-benchtop-drill-presses
Manufacturer : EQCOTWEA
Material : Spring Steel
ModelName : TETPY-027361
ModelNumber : TETPY-027361
PartNumber : TETPY-027361
PowerSourceType : Air Powered
ProductDescription :

Precautions For Use：

1.Before operation,check whether the power cable is properly connected,whether the protective device and the pressing device are complete,and whether the components are normal.

2.The operating position should be bright and without shadow.

3.The drill should be centered, balanced and sharp.

4.This machine is mainly used for wood punching processing(thin aluminum can also be),and the selection of materials can not have nails,screws and other tools damaged or blunt foreign bodies.

5.Hands should not touch the rotating parts of the machine tool during operation, and the wood chips should not be removed during operation.The power supply must be cut off before adjusting or removing the wood chips,and can only be carried out after the machine tool stops working.

6.Stop the machine immediately if anything abnormal is found.

NOTE：Confirm drill hole size before purchase.

ProductSiteLaunchDate : 2025-05-13T06:35:34.447Z
Size : 3PCS 35*6*0.5
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 24101600
Voltage : 110 volts
Wattage : 1500 watts