Cart 2 india

Specification
Brand : JLP
BulletPoint : JLP machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. These fittings have a 3/4" inch hose barb flange machined on them so no hose clamp is necessary. Offered in anodized colors. Hose Barb Diameter (OD): 3/4" Inch Thread Length: 1/2" Inch Nut Width: 1-1/4" Inch NOTE: Install with 1" Inch Hole Saw Bit.
BulletPoint1 : 【FASTER PLANING AND SMOOTHER RIDE】This pair hydrofoils is suitable for 4‑50HP boat outboard, greatly reduce fluid and increase balance performance. Can provides faster planing and smoother ride by increasing stability.
BulletPoint2 : 【PROFESSIONAL DESIGN】This marine hydrofoil wing can reduces drag and cavitation to lower fuel consumption, improves steering at both low and high speeds, and can reduce bow rise. A necessary equipment for skiers, wakeboarders, etc., can help the skier out of the water much quicker.
BulletPoint3 : 【 AND TOUGH】This boat stabilizer fins is made of high‑quality ultraviolet‑proof ABS, can withstand adverse marine environment conditions. With maximum durability and toughness, very to use.
BulletPoint4 : 【EASY TO INSTALL】This boat motor stabilizer comes with stainless steel bolts, nuts and washers for easy installation, the distance between mounting holes(centre to centre) is 2.4in, simple assembly and disassembly.
BulletPoint5 : 【 QUALITY ASSURANCE】We are very confident in the quality of this boat hydrofoil stabilizer, and provide 30 days or refund for it. Please feel to reach us if you have any questions about your purchase.
BulletPoint6 : Value: Not only is Drainman a cost effective, fully autonomous bilge solution, it can also prevent your boat from sustaining costly water damage.
BulletPoint7 : Convenience: Never bail your boat again!
Color : Purple
ConnectorType : Flange
EngineType : Gasoline
ExternallyAssignedProductIdentifier : 7705254519485
ExternallyAssignedProductIdentifier1 : 0732535965362
ExternallyAssignedProductIdentifier2 : 732535965362
FuelType : Gasoline
Hazmat : auto-grounding
IncludedComponents : Draiman bilge pump
ItemDisplayDimensions_Height : 6 inches
ItemDisplayDimensions_Length : 6 inches
ItemDisplayDimensions_Width : 6 inches
ItemDisplayWeight : 1 pounds
ItemName : JLP comptible with PWC Water Bilge Fitting Straight For 3/4 ID Hose Purple Aluminum
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemTypeKeyword : boating-bilge-pumps
Manufacturer : JLP
Material : Aluminum
Material1 : Neoprene
Material2 : Plastic
Material3 : Rubber
Material4 : Stainless Steel
MaximumFlowRate : 2500 liters_per_day
MaximumHorsepower : 50 horsepower
ModelName : Drainman Bilge Pump
ModelNumber : 10
MountingType : Bow Mount
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Manual
PackageLevel : unit
PartNumber : Luqeegbi7prm9oa28427
Pattern : Solid
PowerSourceType : Battery Powered
ProductDescription : JLP machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings usually supplied with aftermarket bilge pump kits. These fittings have a 3/4" inch hose barb flange machined on them so no hose clamp is necessary. Offered in anodized colors. Hose Barb Diameter (OD): 3/4" Inch Thread Length: 1/2" Inch Nut Width: 1-1/4" Inch NOTE: Install with 1" Inch Hole Saw Bit.
ProductSiteLaunchDate : 2015-02-24T08:00:00.000Z
RecommendedUsesForProduct : Improving outboard motor performance, Reducing fuel consumption, Assisting water sports (skiing, wakeboarding)
RequiredProductComplianceCertificate : California Air Review Board (CARB)
Size : Default Title
StreetDate : 2021-08-11T00:00:01Z
Style : Diaphragm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700
Voltage : 12 volts_of_direct_current
WarrantyDescription : Warranty